DCS (WOTD-227) Double Oven Logo

Related Topics:

Question about DCS (WOTD-227) Double Oven

5 Answers

Dim LCD's on DCS Double Wall Oven

I have a DCS 27 inch double wall oven. The LCD's that indicate the oven temperature (the red LCD's) have gone dim so that they're barely visible. Everything else works including the LCD's for the clock (the blue LCD's).

Posted by jeaton on

  • 5 more comments 
  • Anonymous Jul 18, 2008

    I have a 30" dcs double oven. the control panel light is no longer visable.The clock light on the same panel is illuminated,but all the red lights for temp and timer are out.

  • Anonymous Sep 16, 2008

    I had the same problemwit my DSC double. I called Fisher and Paykel. The customer rep recommended I call a service rep. When I asked if it was a common problem she said no but it had been reported before and the part was an EOC (electronic oven control). I gave her my model number and she ordered the part number for me.
    Installatin was a little tricky but everything works now. Total cost $92.00

  • loughran4 Sep 16, 2008

    I had the same problemwit my DSC double. I called Fisher and Paykel.
    The customer rep recommended I call a service rep. When I asked if it
    was a common problem she said no but it had been reported before and
    the part was an EOC (electronic oven control). I gave her my model
    number and she ordered the part number for me.

    Installation was a little tricky but everything works now. Total cost $92.00



  • betha99 May 11, 2010

    Does anyone know the part number to the display? I have the same problem and called DCS but did not have the same response. They do not know what part it so they faxed me the Display Components list with about 30 different part numbers.

  • SF Gal Sep 25, 2012

    My 27" double oven display just dimmed for the 2nd time in 9 years. When I called today, I was told that I could no longer buy the individual part, but had to buy the entire unit at a cost of $325.

  • Anonymous Jun 10, 2013

    This is the second time in 5 years that my control panel light went bad (is no longer visible). I believe that this must be a poor design or a poor quality EOC Double Display Board. I called DCS who is now owned by Fischer & Paykel and they informed me that they can't even buy these boards new anymore. I have to send the board in for a rebuild and the cost is $300+. I love my DCS oven, but can't afford to repair the Display Board every 5 years. Is anyone else having this problem and does anyone else know if these boards are available through some other source other than Fischer & Paykel?

  • Larry Mottola
    Larry Mottola Aug 08, 2021

    I just changed the board. Second one in 10 years easy but expensive fix. $400 w tax and shipping
    Fisher and Paykel has the part #211696. A new dble wall oven is thousands

×

Ad

5 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had the same problem last week - called DCS (which automatically transferred me to Fischer-Paykel) and was able to order the part from them.  They knew exactly what it was, and shipped to me in CA from CA, it was less than $90.  Just installed it, and the new one works swell.  One suggestion - I drew with a Sharpie on one side of each of the three parts that plug into the board to help align the new one, and to install the wide ribbon cable (not really a cable, but you'll know what I mean), pull up on the two side pieces and the ribbon pulls right out.  Keep it up and slide the new one in and then push the black piece down.  That was the only part that took me a minute to figure out.

Posted on Oct 04, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Have DCS WOS 230, same display fading issue, called DCS and told them I wanted the 211696 EOC Double display module for $95.99, they tried to tell me I needed the Control System Kit for $335.72. After many minutes going back and forth told them just ship the the 211696 and I would take my chances. Took 10 minutes to put in and everything works fine. Do not let them try and upsell you.

Posted on Oct 04, 2011

  • SF Gal Sep 25, 2012

    As of today, apparently you can no longer do that.

×

Ad

Megan W

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Dedicated:

    Visited the website for 20 consecutive days.

  • DCS Expert
  • 84 Answers

Hello Friends!
This dimming vacuum display is either caused by a power supply failure with the control board, or a the filaments of the display themselves have started to wear-- similar to that of a bad light bulb. Either way, FixYourBoard.com can solve this problem- This control board is no longer available to buy new. Contact FixYourBoard.com at 512-355-1108 for more information. The photo below is from a double oven, but they repair single oven displays too.
Dim LCD's on DCS Double Wall Oven - ch0509451-q0eqwqv0rnlb52n5vy4kutsd-1-0_0.jpg

Posted on Jul 26, 2017

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a DCS-227 Oven. The broil Element in the middle does not turn on ( but around it does).
Please help

Posted on Jul 08, 2011

Anonymous

It's technically a VFD ( Vacuum Flourescent Display ), not an LCD ( Liquid Crystal Display ).

My 30" DCS double oven had this exact problem - first the red ones faded, then the clock got dimmer and dimmer... Unfortunately, the fix is to replace the display unit.

You can get a new one from your local DCS distributor, or may have luck calling DCS ( which is owned by Fischer and Paykel now ). Mine cost me $125 or so - installation isn't difficult for the mechanically inclined. It fixed the problem.

Posted on Jul 18, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where can i buy a replacement control display

Hello Friends!
This dimming vacuum display is either caused by a power supply failure with the control board, or a the filaments of the display themselves have started to wear-- similar to that of a bad light bulb. Either way, FixYourBoard.com can solve this problem- This control board is no longer available to buy new. Contact FixYourBoard.com at 512-355-1108 for more information. The photo below is from a double oven, but they repair single oven displays too.
ch0509451-q0eqwqv0rnlb52n5vy4kutsd-1-0_1.jpg
Apr 13, 2017 • DCS Ovens
0helpful
1answer

Range has a very dim display

I have a Jenn-Air double wall oven with a very dim display light. Replaced c3 capacitor 68uf 35w - with a 100uf 50w cost $1.60 closes size available at Radio Shack and works good as new. Requires soldering onto the circuit board. I price a replacement part for $276.00.
0helpful
2answers

Display is dim

Hello Friends! This dimming vacuum display is either caused by a power supply failure with the control board, or a the filaments of the display themselves have started to wear-- similar to that of a bad light bulb. Either way, FixYourBoard.com can solve this problem. Contact them 512-355-1108 for more information. The photo below is from a double oven, but we repair single oven displays too.
ch0509451-q0eqwqv0rnlb52n5vy4kutsd-1-0.jpg
1helpful
1answer

My clock and temperature display is dim

Hi, this will happen over a period of time and its just heat related. the control panel isn't insulated properly and , there has been a larger than normal transfer of heat to the inside of the control panel where the circuits are housed.

If this is a problem, i recommend replacing the control board. it will fix the dim issue.
2helpful
2answers

Oven digital lighted display is dim

mY 27" WALL jENN air blows cold air out the vents when on cleaning cycle. The red buttons aren't lighted. The door locks, otherwise it bakes fine. I wonder if it is really cleaning?
0helpful
1answer

DCS wall oven very dim display for settings

typical for gas filled displays. check other postings for same problem for correction. part cost is $92.

2helpful
2answers

DCS Single Wall Oven Model WO-130-SS

Order part #211708 from 1-888-281-5698 DCS [email protected] new Zealand. Only need philips head screw driver and twenty minutes. This part is a upgrade for lcd only. old part was a three part system, but no need for three parts only lcd screen.
0helpful
1answer

FGB24L2ABB Frigidaire wall oven

local outlety to buy rack for oven
jeff
Not finding what you are looking for?

3,939 views

Ask a Question

Usually answered in minutes!

Top DCS Ovens Experts

vince

Level 3 Expert

1543 Answers

Brad Brown

Level 3 Expert

19166 Answers

NOEL
NOEL

Level 3 Expert

8603 Answers

Are you a DCS Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...