Press MENU and then 2.
Press < or > to set location then press 'check mark'.
Press 1 to confirm.
If this doesn't set the language, then you will have to do a NVRAM Init. Beware that all settings will be reset to factory default. So, make sure that you know how to enter the correct ones.
Turn off printer. Press and hold the * and 'check mark' while you turn on printer. Keep holding the buttons down until you see displayed "Permanent Storage Init" Release the buttons. Wait for it to ready.
Now when it is ready you can press < or > until the correct language appears. Then press "check mark" and press 1 to confirm.
Good Luck
663 views
Usually answered in minutes!
×