USB\VID_17A1&PID_0118&REV_0100 - Cobra Digital DC125 Digital Camera

Device Name: ?USB Input Device
PnP Device ID: VID = 15D9 PID = 0A41
Serial Number: 5&&192F622A&&0&&1
Revision: (Information not returned)
Device Type: Standard USB device -
Chip Vendor: Agilent(???)
Chip Part-Number: A2625
Product Vendor: USB
Product Model: Input Device
Tools on Web: (N/A)
This does not work

Following this step :
1. you just need to see your ID Product (PID) and ID Vendor (VID), you can use this software to find your PID and VID, USB VIEW, for reference see this picture

after already found the PID and VID, take only for digit behind X.

2. visit this web http://flashboot.ru/iflash.html to find correct software for your flashdisk, just filled up at box like search.

3. or after you know the VID and PID you can contact me to find correct software for your pen drive type.

Good Luck

You need to slide the unlock on the side of it to remove the write protection from it

kevin guth

check for the installed drivers in the control panel.try uinstalling the drivers and reinstalling them back again...try deleting the registry VID and PID keys if possible(hkey local machine/system/control set 001,2,3,4/enum/USB/VID and PID starting with 7.see if it works.....

first, find the vid and pid infomation of your adapter. insert the adapter to the socket, you a把蓝牙适配插入到USB上,打开设备管理器,选中带黄色感叹号的选项(usb device),右击属性,选中详细信息,在那里可以看到蓝牙适配器的厂商ID和产品ID,VID_后面的数字对应厂商ID,PID_后面对应的的产品ID
我买的这个蓝牙适配器,厂商ID为0E5E,产品ID为6622,记录下这两个数值,

C:\windows\inf\ (inf文件夹是隐藏的,得先显示所有文件才看得到),find the file "bth.inf", open it and add a line under the sony.NT.5.1

[Sony.NT.5.1]
USB Bluetooth Device= BthUsb, USB\Vid_XXXX&Pid_XXXX

XXXX is your adapter vid and pid

手动更新驱动,会发现一个名叫my bth的驱动.安装上即可,这样子蓝牙适配器就装上了,用的是windows自带的蓝牙驱动(精简优化过的系统可能没有).自已去试试,感受感受吧

Use this Link
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=bpy20135

All HP devices have a Vendor Identification (VID) of 03f0. The Product Identification (PID) is listed on the same line as the VID. For example, the correct key for the Photosmart 120 camera would be VID_03f0&PID_4002. The PID is unique for each USB device

So remove any thing which says VID_03F0 even VID_0000

Then Deleted the folders HP or Hewlett Packard from the programs folder

then instal the drivers from the CD

Hello, look the device VID & PID in
Control Panel --> System --> System Properties --> Unknown Device --> Details

Es. I Found on my notebook : USB\VID_067A&PID_7561\5&1737F18D&0&2
Then Modify SER2PL.SYS with your VID & PID

Es. :
......
[ControlFlags]
ExcludeFromSelect = USB\VID_067A&PID_7561
.....
.....
[Pro]
%DeviceDesc% = ComPort, USB\VID_067A&PID_7561
.....

Reinstall the driver