Need Help I conected all the speakers and the sub doesn't work! The surround system is DiVinci.. Please help

Alright i had a chance to look over things, this is how you are going to hook up the sub. first we'll be connecting the surround sound unit to the sub woofer.
surround sound unit sub woofer
left front: positive (+) <-----to------------->(+) left speaker level in
negative ( - )<- - -to- - - - - - ->( - ) left speaker level in

right front: positive (+) <-----to------------->(+) right speaker level in
negative ( - )<- - -to- - - - - - >( - ) right speaker level in

now that the surround sound unit is connected to the sub woofer you will need to connect the front surround sound speakers to the sub woofer.
sub woofer front surround sound speaker
left speaker level out (+)<-----to--------> (+) left front speaker
left speaker level out( - ) <- - - to- - - - ->( - ) left front speaker

right speaker level out (+)<-----to--------> (+) right front speaker
right speaker level out( - ) <- - - to- - - ->( - ) right front speaker

Alright now that the wires are all over the place and plugged in
turn everything on and see how it sounds. let me know if everything is working as it should. if you need help with anything else or if something does not seem right please feel free to contact me via e-mail or phone
Mark Woodring

Well if you look on the back it plainly says speakers should be between 8-16 ohms.

It has facilities for 2 pairs of fronts (A and B) which could be run concurrently if they met the >8-ohm spec.

http://www.use.com/PIONEER_767cb5bb4ea6f30a06fc?p=7#photo=9

http://www.use.com/showorig.pl?set=767cb5bb4ea6f30a06fc&p=6

The JBL's would work best as primary front speakers.

http://www.retrevo.com/support/JBL-CF100-Speakers-manual/id/597bh151/t/2/

If you wired the Bose in series with each other, they'd work as one surround speaker 'pair' electrically, maybe even sonically if you arrange them across the sides and/or rear. I'd experiment.

http://products.bose.com/pdf/customer_service/owners/og_161.pdf

You'll need a separate amp for any center or sub speakers.

its garbage. Look up 'white van speaker scam' on the internet. Try getting your money back if you can find the scammer who sold it to you. If you do get it to work, it won't last long and I've heard that it sounds cheap.

I don't think that can work...

FYI, look up 'white van speaker scam' on the internet to find out more about your divinci speakers...

Why would you want to?

Look up 'white van speaker scam' on the internet.

i have the same problem but mines a d-7... i threw it at my brother ;)

davinci DA-6.1 home theatre tokk it out of box their is only speaker wires that connect on to another no power source or wires to tv I need help

what kinda of reciver do you have? because i need a reciver for theese speakers.

Make sure you have each component linked to your system and thew sound for each input set to prologic to get surround sound.

Hope this helps.

CABLE GUY.

To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:

1. Verify that all cables are plugged in correctly. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the source selector switch or the M3D button on the controller unit (if available). You can also use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.
3. Try connecting the speakers to a portable sound device such as a walkman or portable CD player. Plug the speakers into the headphone jack, but make sure the volume is lowered so the speakers are not over powered. You can do this for both the front, rear, center/sub speakers to verify that they work. If the speaker system works on the walkman, then you are experiencing a configuration issue with your sound card. Please contact your sound card manufacturer.
4. Check the system Volume Control located in the System tray. Make sure that the volumes are at a reasonable level and are not checked for Muting.

Try these articles as well:

Manual

Setting up the Z5500 with PC, Mac, Xbox, Playstation, DVD Player, etc.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid