- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Panasonic5. Preface. The network camera WV-NF284 is designed to operate using a PC on a network (10BASE- ... This function detects a motion in a designated surveillance area and issue an alarm signal is ..... Use this button to reset the settings of.
go to on screen "setup" select "network" select "Network easy setting" Select "wireless" do the connection check the 2wire modem should be detected by the DY WL10 Select the 2wire select "open system" select WEP encryption enter the encryption key, or just "key" (it is the number in brackets somewhere on the 2wire). Do not enter the brackets. follow further prompts. It is easy from here on (famous last words)
I UPGRADED TO VISTA AND NOW I CANT GET MY 2WIRE PORTAL SOFTWARE TO INSTALL. IS THERE AN UPGRADE OR NEW SOFTWARE AVAILABLE ? ► there is no need to install the CD if ur trying to connect using an ethernet cable to the 2wire. If ur attempting a wireless connexn, u shud configure the wireless set up.
1000 SW (Model) for 2wire,Connects fine, intermittently the Broadband Link goes ORANGE and keeps me off Internet ► this is a possible line problem. Try plugging ur 2wire's phone cable directly to the phone/wall jack removing the filter or splitter in the process. Then see if the problem reoccurs. If it DOES NOT, replace ur filter with a new one. If it DOES reoccur or if it is already connected to the phone/wall jack directly, contact ur Internet service provider.
The 2 wire Home Portal 100w is a Modem/Router combination with wireless. But it has only one LAN port. So I understand that you are trying to use a DAX router for extending the number or ports. The reason they may not communicate if 2wire LAN is connected to DAX WAN is both may have same IP address. If the router has similar IP on WAN and LAN, it will not communicate. For that changing DAX router's LAN IP will be a solution or you can do LAN to LAN cascading. Connect 2Wire LAN to DAX LAN and dont use the WAN port. This way you dont have to change anything in the configuration
do you mean the modem's ip address? http://gateway.2wire.net http://homeportal http://homeportal/setup http://192.168.1.254 (software version 3.7.x and higher) http://172.16.0.1 (software version 3.5.x or earlier)
I had the same problem. Even tried turning DMZ on in my router, and specified the camera IP as one in the DMZ. What helped me was using a port scanner (do a google search). I then started trying different things until I saw the port was opened. Once the port was open, I was able to access the camera from the internet, even from within my internal network. It turned out my problem was I have Vonage VOIP phone service and the Vonage router was ahead of my network router. Apparently the Vonage router wasn't allowing internet traffic to the camera. I switched positions of the routers (my wireless router is now first, and my Vonage router is plugged into the wireless router) and everything works fine now.