Operates ok but very noisy - Hotpoint WMA44 Front Load Washer

The ice usually makes a fan noisy by filling the cavity it needs to move the blades in. check if this is the case, if there is no obstruction and the fan motor itself is noisy it needs to be replaced or serviced, servicing parts is trickier to find than the little motor it self.
To clear the ice just let the fridge stand for a few hours and to help the process speed up you can spray the evaporator with luke warm water.

Try lowering the presuure on the mains

Check the belt tension, it could be noisy because it is slipping on the pulleys. If the tension seems ok, you can buy a belt dressing spray which may quieten the operation, but it is probably better to replace the belt as it seems to have become hard and polished to make it squeal. Good luck and please rate this solution.

sorry....but sounds like the drum bearing has popped..................
cheers

check the resources allocated for your Cd Drive.Also check the compatability for the Cd Drive. If possible try to increase the virtual memory for the computer.

The top and front panel must be removed to get to the belt. Also if the belt is worn buy a roller for the tensioner as well for they wear fast and the inner bearing causes the noise you heard

You are definitely right. Its the motor bearing. You can
see it just as soon as you dismantle the motor and the
pump. We cannot test it, but it can be heard. There's no
other part in a pump that could be noisy due to wear and
tear.

Sounds like your left channel output transistors are getting weak.

if the movies are copying ok then it will just be a noisy burner, possibly some vibration also, mine is the same, noisy but burns ok. You can try and reduce some of the noise by taking the side panels off and make sure the screws are tight on the writer
regards