Error code. Fisher and Paykel Dishwasher

Question edited for a lot more clarity. Your 'Possess F&K DW60FC' does not exist! :>D
Question moved from Televisions category.

Rebooting is not the fix, it won't work until you fix the pumping out.

Fisher and Paykel dishwasher error codes f30 The F30 error code signifies that the flood switch on your machine has been activated. This indicates a problem with water drainage. This could be a one-off issue, or it could be a symptom of something deeper. For example, if the drain hose is bent or blocked, it could cause dishwasher problems like flooding.

How to Fix F30 Error on Fisher and Paykel Dishwasher

https://unitappliances.com.au > how-to-fix-f30-error-on-...
Search for: Fisher and Paykel dishwasher error codes f30

Hi,

from what I'm seeing for the dishwasher, an E1 error means that the door is not properly closed. So, please look at the door of the machine to make sure that nothing is broken or that the dishwasher isn't too full. Thank you.

This is wep page of codes. Hope it help. If not call customer service for manhttps://removeandreplace.com/2016/06/07/fisher-and-paykel-dishwasher-dishdrawer-error-codes-and-troubleshooting-how-to-fix/

https://www.google.com/search?q=Fisher+and+Pykel+Soft+Touch+dishwasher+operating+manual&rlz=1C1GGGE_enUS385US385&oq=Fisher+and+Pykel+Soft+Touch+dishwasher+operating+manual&aqs=chrome..69i57.92066j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

Fisher and Pykel Soft Touch dishwasher operating manual Google Search

Hi.

F5 is Lid Fault.

Try clearing the error code by disconnecting power from circuit breaker for five minutes. If that does not help, then there is a problem with lid switch. The part must be tested and replaced.

Regards.

Ginko

Do you get any error code on the display?

Does the cycle complete or dishwasher keeps running?
Do you hear the pump trying to drain?

Is it happening in all wash cycles or some?

The easiest thing to do is to check if the filter at the base is clean.
I am assuming the kitchen drain is clear because the other drawer seems to work normally.

I am assuming you have the DD605 double drawer dishwasher. Is the problem F5 on both drawers or just one?

F5 code involves the drawer lid seal and will need a bit of effort to check and fix.

Take the drawer out and inspect the inside of the top panel for a black rubber strip. If it is broken or not responding to up down movement then it needs to be replaced. In addition the actuator motors on each side that drive the seal could be faulty.

If you are not comfortable with repairing slightly complex apliances then you may have to call the technician.

That's an electronics failure code. Bad news.
http://www.advantagesupplyfl.com/FisherPaykelDishwasherFaultCodes.html

there is no f5 fault in any of the soft touch f7p dishwashers, sure its not something else whats the model no , i fix f&p for a living

The f1 code is caused moisture in the electronics part most likely in the door.see if there is any way that you can see where moisture might get in and plug that spot up. In the case of the f1 code when not using the dishwasher leave the door propped open to help dry out the electronics.