Needs to press soft reset to wake it up

Try a soft reset first:
1. Press and hold the Sleep/Wake button on the top of the unit until a red slider appears
2. Drag the slider.
3. Press and hold the Sleep/Wake button until the Apple logo appears.
If a soft reset doesn't work, try a hard reset:
Press and hold both the Sleep/Wake button and the Home button for about ten seconds, until the Apple logo appears.

Try a soft reset first:
1. Press and hold the Sleep/Wake button on the top of the unit until a red slider appears
2. Drag the slider.
3. Press and hold the Sleep/Wake button until the Apple logo appears.


If a soft reset doesn't work, try a hard reset:
Press and hold both the Sleep/Wake button and the Home button for about ten seconds, until the Apple logo appears.


If this does not solve the issue the sensor is damaged and will need to be replaced.

Hi,


Seems like your iPod has frozen.


Try a soft reset first:
1. Press and hold theSleep/Wake button on the top of the unit until a red slider appears
2. Drag the slider.
3. Press and hold theSleep/Wake button until the Apple logo appears.
If a soft reset doesn't work, try a hard reset:
Press and hold both the Sleep/Wake button and the Home button for about ten seconds, until the Apple logo appears.

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) 5 times - display should read "Time and Date"
4.- Press "SHOW" (top right arrow)- display should read "Hour:___"
5.- Press soft key "CHANGE"
6.- Enter hour - display should read "AM OK or Change"
7.- Select AM or PM
8.- Press "NEXT"(bottom right arrow) - display should read "Minutes:___"
9.- Press soft key "CHANGE"
10.- Enter minutes
11.- Press "NEXT"(bottom right arrow) - display should read "Year:___" 12.- Press soft key "CHANGE"
13.- Enter year
14.- Press "NEXT"(bottom right arrow) - display should read "Month:___"
15.- Press soft key "CHANGE"
16.- Enter month
17.- Press "NEXT" (bottom right arrow)- display should read "Day:___"
18.- Press soft key "CHANGE"
19.- Enter day
20.- Press "NEXT" (bottom right arrow)
21.- Press the Rls key

Try a soft reset and hard reset your iPod Touch if it’s frozen or not responding.
Try a soft reset first:
1. Press and hold theSleep/Wake button on the top of the unit until a red slider appears
2. Drag the slider.
3. Press and hold theSleep/Wake button until the Apple logo appears.
If a soft reset doesn’t work, try a hard reset:
Press and hold both the Sleep/Wake button and the Home button for about ten seconds, until the Apple logo appears.

Hello. This will step you through the process of restoring your iPod Touch to factory settings. Please remember that this will erase all of your files, settings, and data stored on your device.

1. Connect your iPod to your computer.
2. Select your iPod when it appears in iTunes under Devices.
3. Select the Summary tab and then the Restore option.
4. Select the Restore option when iTunes prompts you.
5. Once the restore process has completed the, iPod touch restarts and displays the Apple logo while starting up.
6. Select "Set up as new…"

Hope this helps. Good luck.

To reset the handset, to the factory default settings, follow the steps below:

1. While in standby mode, press the left soft key for Menu
2. Select Settings (9)
3. Select Reset Settings (10)
4. Highlight, using the navigation keys, any of the following:
• All: Phone, Display, Profile and Alarm settings will be returned to default values
• Phone Settings: only phone settings will be returned to default values
• Display Settings: only display settings will be returned to default values
• Profiles: only profile settings will be returned to default values
• Alarms: only alarm settings will be returned to default values
5. Press the center navigation key to check the box(es) of reset settings
6. Press the left soft key for OK to set the Reset
7. Enter the password, using the keypad, default password is “00000000”
8. Press the left soft key for Confirm
9. Enter the password again to confirm, using the keypad
10. Press the left soft key for Confirm
11. Press the left soft key for Yes to reset the handset's settings to the factory defaults
    

Turn off your mobile and then pull out the storage card, Restart your device, it should work now !!!

I heard this happens after updating the Treo 650 with the new version 1.17. Is this your case? If so just remove the new update... Anyway, you can try the soft restart or even Performing a system reset(from the user guide p.170): ".. Performing a soft reset A soft reset is similar to restarting a computer. If your Treo is not responding or you have trouble synchronizing with your computer, a soft reset may help. 1. Press the Battery Door Release button and slide the battery door downward to remove it from your Treo. 2. Use the stylus tip to gently press the reset button on the back of your Treo. .."