How to pair with cell phone Lost manual for jabra bt530

http://audio.manualsonline.com/manuals/mfg/jabra/bt530.html

Christine,
To put the Jabra in discovery mode, turn it on and hold the answer/end button for five seconds until the bluetooth light starts flashing and it announces "pairing mode." Then connect with your cellphone!
You can order a new charger for your car/computer from this link:
http://www.buyjabra.com/US/accessories/universal-charging-kit-car-usb-136.html
Or, for your wall from this link:
http://www.buyjabra.com/US/accessories/us-wall-charger-for-bt530-jabra-halo-144.html
Best of luck!
- Zach

Are you in the US?

http://www.bluetoothandbeyond.com/servlet/the-2350/NEW-JABRA-BT530-ACCESSORY/Detail

One only for $9.50, extra stuff, free shipping.

hi

you need to check the batteries
if are ok
open it and search from your phone for it

http://img1.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT8040/Documents/UM/BT8040_UM_EM_EN_1409.pdf

Here you go

I've had the same problem. The only place that has it is the source. Jabra is located in Sweden. the price for the ear hooks (which can only be purchased in a kit) is 9.99 with a 9.99 shipping fee. It just depends on whether you want to spend $20 on a ear piece. Here is the link http://www.buyjabra.com/accessories/eargel-earhook-kit-for-bt530-135.html#

Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Hi terry, first thing to do is,

• make sure the headset is off.
• press and hold the answer/end button until a solid blue light comes on.
• go to your phones settings turn on the bluetooth.
• select the option on your phone to discover or add a bluetooth device.
• your phone should discover the jabra bt350.
• your phone will then ask you if you want to pair with this device.
• accept by pressing ok or yes.
• confirm with the pass key or pin = 0000

You may have to find it in the Bluetooth My Devices section...it may still be present in the phone even if not paired. If found delete it. Put your headset into pair mode and pair it then.

http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT150/Documents/User%20manual/BT150_UM_NA_EN_496.pdf
Link for the manual

Page 4 for Pair it with your phone