Parts for 150,000 btu reddi heater - Desa International RH125AT Utility Heater

If you have the brand name I may be able to tell you who the dealer for that product was.

Here's a link to the Owners Manual http://www.desatech.com/manuals/Construction%20Heaters/102439-01.pdf Pay particular attention to Page # 7.

Hope this help you. Please let me know.

Hi,

Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters

Torpedo Heater Pump Pressure Adjustment

heatman101

http://www.reddyparts.com/pressure.htm

You can try reddyheater .com or try a two part epoxy. Clean well with acetone, sand paper to create good adhesion then JB Weld or any other good grade epoxy. This will work in a bind until you locate a new tank.

since the combustion temp of diesel is different from KERO, expect the heater to shut down from overheating at times.
since it will probably heat up faster than on KERO.

Is there a frost line on your LP tank, if so you may need to replace the tank with a larger tank or refill your tank. This can happen if the tank your using is too low or too small (use 100 lb tank or greater). If there is no frost line it may be an issue with the thermocouple. The manufacturer offers a service manual and owner's manuals on there site. This should assist you... www.desatech.com Thank you

Hi,
Here are a couple of tips that I wrote that tell you how to troubleshoot aTorpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters Torpedo Heater Pump Pressure Adjustment
heatman101

..,//,

the ignitor is faulty, mine also did that and I noticed one night that it was shorting out right from the ignition box. I put in a new ignitor and flame sensor and it's fine now. All ignitors are basically the same you just have to do some creative wireing. reddyparts.com still has most parts for your heater.

Look for a fuse!