I need to replace the black glass on my Magic Chef cook top do you carry this

The cooktop can be replaced and is available from Sears for $263.57
Part # 74003377
Substiture part# 12001393
Can be ordered online or by phone

I am assuming having looked up the model that you have a glass top range. These ranges use a thermostat to regulate cooking temperature, and when they go bad you will either suffer from erratic cooking temperature or have no heat at all. The best solution I can think of is to replace that thermostat.

Suggest that the new igniter is defective.
The bath tub concept of early failures is the most likely explanation this recurring failure,

The prior failures relate to the late in component life the far end of the bath tub curve.

Hope this helps?

The Bathtub Curve and Product Failure BehaviorPart One The Bathtub Curve...

Hi, normally what causes the igniter to keep clicking is spilling water or something down into the knob area. The water is causing a short circuit in the switch which is mounted on each burner valve shaft. If unplugging the range for several days to allow drying doesn't fix the problem, then one of the switches will need to be replaced.

DO NOT SILICONE
appliancezone carries the foam tape you should use
WB2x9902 12.00 a roll
it should be installed

I'm Bruce of DeBruce Polish, our new polish is non-toxic and odorless and non abrasive, should take care of your problem. We designed it for stainless steel, and have faboulous results on ceramic stove tops, and chrome and many other uses. Even removes permanent magic marker. web site will be up soon debrucepolish.com. Phone 612-220-2236.

those wires dont go to the down draft. those colors are to hook up the stove. do you have the instalation instructions?

This part can cost over $400. It is usually not worth fixing. NEVER operate the stove with a cracked top. This is tempered glass and it can just explode! It is also a dangerous electrical issue. Liquid can drip down through the crack and contact the live open element.

f1 is the code for a failed clock most of the times you must replace the clock most of them have a five year warrenty check your owners manuel for warrenty info