My HP 7410xi Officejet was working fine yesterday, and was on "standby". Today it would not respond. I disconnected the power for more than one minute, reconnected the power, but it would not turn on; it just displays the logo line " HP invent" on the LCD screen with a gray scale bar below the logo. This screen continues for a while, then goes blank and repeats the same display.

Hello Doctor,

In my OfficeJet 7410xi... it was the 802.11 card.
(endless power loop)

I opened the rear ...
pulled the 2 wire (black & white) power feed and the printer came back to life (obviously no longer WIRELESS).

The annoying little card actually lived under the front key-control panel.

Needless to say...
HP tech-support was PATHETIC (in my humble opinion). My parts came from eBay... and the procedure came from anecdotal cyber-wisdom (other BEWILDERED HP victims sharing their frustrations).

On the 7410xi less than 2" x 3" (small) card nomenclature:
HP5092-5028 (rev. A) multilayer (not-serviceable) PCB
Tyco 100902 LF
PN 1513349 (rev. C)

Hope this helps with your search...
HP "should" Help... I'd love to hear about it...!!

If you really love it... (sorry)

donor parts?
22results for OfficeJet Pro 8600 802 11 card

Hi Dave,

Open www.hp.com and enter your product # as 6500 in search bar and hit enter key

Select Software and Drivers Download ( or support for HP Officejet 6500 Wireless ) and choose the operating system to download the drivers and install

Regards,
Sean

Check to see if your credit card offers extended warranty. That's why I buy EVERYTHING on an American Express card, which adds 1 year of warranty beyond the manufacturer's on everything you buy.

These devices are disposable, and HP is particularly fragile. I wouldn't buy another HP product. When you decide to replace this, you'll be a lot happier with Canon or Epson.

Turn it off, hold down 3 & 6 turn back on, if no love, throw it in the dumpster

you have not installed the printer at your PC.pls installed the printer.

The remote machine has failed to respond to a fax command from the local machine due to the connection being interrupted.

Number of possible causes, check the phone line, try a different fax number for a start. Is there other fax machines in the office on the same line

Re install the drivers

you must calibrate your printer when installing new cartridges

Hi,

Please click here and folow the instructions to resolve the issue.

http://multifunction.free-driver-download.com/33551/HP-Officejet-7410-7410xi-7413-All-in-One-Basic-Software-Driver-4.7.0-Windows-2000-XP.html