No voice i bought a samsung wep200 a few weeks back and while speaking on it the mic, i guess gave up, i don't remember getting it wet anything like that, i can hear them talk but they can't hear me say anything back,

Have you got that particular headset enabled in audio settings.

If you are talking about Skype: click Tools - Option -Audio Settings- Microphone then the down arrow at the extreme right of the mic name box, select your mic if it's name is in the drop down menu.-- scroll down and click Save. then test it.

Good luck

try reset the phone.

Try reinstalling the sound driver and also check the volume for the mic.

open pcb & select multi meter at ohmic value
check connectivity on mic pad at pcb if shows anythink connectivity just replace mic if does not shows anythink when you checked connectivity find wich contact are brokened
Method;how find wich pad are broken
place one probe of multi meter on pcb ground & check both pad of mic on pcb when does not shows connectivity on any pad of mic remember it after that arrenge other same type pcb & place any probe on mic pad that you identified & check connectivity at near about when shows on multi meter full conductivity & remember it now resold jumper between mic pad & that part that you searches in your foulty circuit board

your mic is broken or damaged

did you just purchase the unit? if so it may be defective. As far as i can tell this headset should work with the handset you specified and i cant find anything saying there is something special you need to do. Most i can say if you can return it or get it replaced its probably your best bet. Sorry I am unable to provide you with a more positive easier solution. But I hope this puts you on the right track. Thank you, Nathan

You can't hear yourself at all when recording or you can hear yourself but with a delay ?

may be there is some dust in mic hole just clean then check or go to near service center for replacing ur mic

just purchased Nokia 6300 cell phone and connected it with my bluetooth headset Samsung Wep200. As my new phone has advanced voice call, everytime the headset's button gets pressed accidentally even once and someone is talking, it starts calling on it's own. Is there any way to disarm the advanced voice calling? Have the same problem? Click Here

when you turn on the WEP200, you must continue to hold the button down until the blue light goes solid, that indicates pairing mode. Now, have your device search for it.