We have an oversize hdtv picture and oversize blue show discription (at the bottom) suddenly. We must have pressed a wrong button.

hows the picture? is it 3d looking? do you have the convergence option in the setup menu

Hi,

Is this a problem only with the cable box or also with oother sources as well?

take pritner to factory defaults .
press cancell and power button at same time.
you will see message on screen enter special key combo. then press blue green and gray button in a sequesnce. it will show you support on screen. press blue button 2 times it will show reset menu. press ok on it. then press blue button 2 times it will show semifull reset press ok.

You will need to have the convergence IC'S replaced and realine the set again.
call around and get prices.

ok

you used a regular usb cored. i had the same problem you have to send ut in to get a new one its broken you need a dat cord hope i helped

does it work if you connect dish??

Press the reset button...it's on the bottom to the right (underneath the TV). Same thing happened to me.

If the double images are located at the bottom on one side, you might have cracked the mirror inside the set and it has been displaced making the picture in that area bad (especially if the rest of the picture is OK)

I have the same issue...help!