F14 fault on Miele dishwasher - Miele Dishwashers

You can take help from - https://realappliancerepair.com/

The F14 Fault is a heater pressure switch fault - usually a machine that that been in service for a while gets soap build up in and around the sensors - the heater pressure switch being one of those. Its purpose is to measure the pressure of the recirc pump to make sure there is sufficient water pressure to turn the heater on - without sufficient water pressure the heater would burn up. The pressure switch gets gummed up with soap deposits over time and should be changed out

Miele Fault Codes

Different brand dishwashers have different fault codes. That said, this may well be your brand. It does list the F14 fault code as well as the others.

Well first of all, before anyone can help you, you should post the make and model of your dishwasher.

see previous answer by Linda74
F14 problem with miele dishwasher model G2270SCVIWOULD be grateful for...

This fault is low pump pressure. more than likely you have some foreign particles jammed in the circulation pump. you would have to remove the unit, tip it on its side and remove the bottom plate and remove the circulation pump and clear the blockage. the unit will start and stop and not work until the pump is clear.

Hi F14 is when the pump pressure switch does not operate. This can be caused by several things. Circulation motor blocked or defective. Insufficient quantity of water in appliance.Most commonly it is debris in circulation pump.This will require motor to be removed and cleaned.appliance will have to be un-installed

Hi,
The error F14 in your dishwasher is due to water intake fault with heater or circulation pump, or something like that. The circulation pump would have been clogged. Try to clear it and your problem will get fixed

the clogged circulation pump (error code F14)

Check the motor circulation impeller, if you not maintain the unit is gonna be clog by impeller. it need to be clean.