I have bought a TOSHIBA REGZA AV700 32 HD Ready LCD TV. I want to use my set-top box remote control to power on/off the TV as well as AUDIO controls to work from my set-top box remote control. Currently i am finding it bit difficult to use both remote controls, one for changing channels and another for audio control and power on/off of TV. Can you please guide me, how can i do this with single remote. I have AIRTEL dish TV connection and i am in PUNE, INDIA.

Check on your remote control.

As far as I can make out, this Toshiba model is made for the US market so doesn't actually have a freeview tuner. It will only receive satellite and cable HD signals and local US TV, all of which has to be bought. You need to get something like an August DVB400 - HD Freeview Set Top Box -Digital PVR Tuner with USB TV Recording, eBay would be best I think, where they are sold for under £30.00. The tuner packed up on my 32" Regza so I bought one of these and it works fine. Plus you can record to a USB stick if you don't want to miss a programme. Hope this helps ......BS

REFER TO ITS MANUAL

Look for any jammed buttons on remote or on control panel.

Hello The Toshiba Regza 32RV635D is a Fully HD TV. with four HDMI connections.
Connections

The location of the connection ports is in keeping with today's standards. They are easily accessible and well constructed.

Port Listing: 4 HDMI, 2 SCARTs, Headphone Jack (with Independent Volume Control), S-Video, Composite Video, Common Interface, Component Video, Digital Audio Out (Optical/Toslink), RF In and D-Sub.

You can read the reviews here:-

http://reviews.cnet.co.uk/tvs/toshiba-regza-32rv635db-review-49302355/

and

http://www.techradar.com/reviews/audio-visual/televisions/plasma-and-lcd-tvs/toshiba-regza-32rv635db-679432/review

Hope this helps, if so do rate the solution.

check to see if it is set to vcr or dvd at the switch on the top left corner.

Check your resolution output from laptop it maybe set to high for the TV to handle, also go to the Display Properties and ensure that the second monitor out is enable. Good luck!!

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0156

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

There is an easy way to adapt the cable.

Any good computer shop will have the adaptor.

Take the HDMI cable to them, and tell them you want an adaptor to go to composite signal.

(I know that they're made, many of the graphics cards I use to build computers come with that cable adaptor)

You also might try Best Buy or Radio Shack, but you might not have much luck with them.

You have the TV connected to the cable box with an HDMI cable, I'll bet. The problem is with the cable box. If you unplug the cable box and plug it back it it will reboot and proabably work. You should connect the cable box to the TV using component cables and you won't have this problem again.