At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unplug and replug the wires and check for damages as well, set audio settings on the device if its matching settings on receiver as well, try testing the settings thru TEST TONE CHECK
check the speaker connections, if you have a receiver that has front and rear,, switch the speakers to rear to make sure the speakers themselves are working correctly, by allowing the headphones to produce sound its letting you know the outputs for the receiver itself are good , also,, be sure that the speaker selection switch is ON and that its set for the correct speaker selection. (re front or rear or both) and that Mute isn't on
2. As far as the Fronts limiting to 0 dB, they are the reference for all others. Perhaps the engineers thought it made no sense for the stake in the ground to have a moving reference level. See step 3 on Page 50.
on the main board there is Amplifier its possible that its burned when you short or overload the speakers it could happend
let a technican check the Receiver
There is a obvious difficulty here. If you have a stereo receiver then it can't produce surround sound. You must have a surround sound receiver to present true surround sound. If you already do have that then on the back of your Phillips set there are audio outputs. The left and right audio out will be decoded in your surround sound receiver and they will automatically play from your speakers. You should have seven speakers, center channel, left and right front speakers, left and right rear speakers and left and right mid or side speakers. A sub-woofer would be nice too. Best bet is to speak with the store you purchased the set from. They will have that information.
Assuming you do have all 5.1 speakers connected and a digital signal (DVD/CD etc)
Make sure that you have the surround speakers connected into the right spot on the rear of the amp: they can be confusing with their markings.
Front speakers should be in speaker A front.
You must have the sound setting or sound programme on Dolby Digital or similar, Not just stereo. There should be a dial or button on the front panel for this.
Bear in mind that the rears are the only for effect and do not alway produce sound.
Maybe send me more info:
×