How do I set an IP address on a SATO M84PRO printer with ethernet connection.

http://support.scansource.com/scripts/sseasyfaqs.cfg/php.exe/enduser/std_adp.php?p_sid=FIh96n2l&p_lva=&p_faqid=3428&p_created=1171475775&p_sp=cF9zcmNoPSZwX2dya
http://www.retrevo.com/support/SATO-M84Pro-Printers-manual/id/1305bh051/t/2/
hope one of this documents will help you.

check the network printing settings in the printer, its a problem in the settings somewhere, unless theres a fault somewhere.

the ip is 224.0.0.1
when i tried changed my notebook IP, it said invalid range.

This sounds like a software problem. Can you give me details of software used i.e. database and labeling software?

Possible fualty printhead. make sure head is clean. Use Isopropyl alchol and lint free cloth to clean head(don't be too gentle). Or it could be a faulty head.

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop,desktop,printer do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the device about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

There is a tiny button on the print server back plane that you can press with a paper clip. This will print out a label with your IP address information. Get the IP address (hope that the printer is set for DHCP) and enter this into a web browser. This will take you to a web interface that will let you make configuration changes to the print server and printer. If the printer is set to static IP, change the IP address of your PC to be in the same subnet as the printer and then fire up the browser.
The user name for the printer is ADMIN and the password is 1234 by default. You can also download ZebraNet Bridge from Zebra's web site. This application will find your printer on the network and let you install fonts, upgrade firmware, change settings, etc.

You must use the provided software to change the settings. It looks for the printer by the MAC address

2 ways you can determine the IP setup.
1: You can use Sato's ip net software, available from the Sato web page. This software will discover the printer on the network through a connected PC.
2: With the NIC carad inserted, the IP address can be set through the front panel by depressing the line key while powering up the printer. You can scroll through to the settings and change to the needed IP address

Connect one end of an ethernet cable into the ethernet port on the printer and the other one into a free port on the router. Then, using the install CD, tell it that you are attaching a printer on the network. The software should automatically detect the printer on the network and set itself up for it.