Behringer Xenyx 802 8-input 2-bus Mixer W/ British Eq ! Logo

Related Topics:

Posted on Dec 17, 2010
Answered

How can i setup mu xenyx 802 with my pc? i also hve fca202...

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 26 Answers
  • Posted on Dec 17, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Dec 17, 2010
Answers
26
Questions
0
Helped
8251
Points
40

You can do it one of two ways when coupled with the FCA202. First, You can just come out of the main outs on the 802 via 1/4 in to the 202s 1/L in and 2/R in. Second, you could do two separate channels (ie. Vocal channel and Guitar Channel) using the L/R out on the 802. Use the pan knob to send the instrument to the selected channel. So, If your Guitar is on channel 1 pan hard left and you will only get it out of the left channel sending to channel 1 of the 202, and your vocal is in channel 2 pan hard right and you will only get it out of the left channel sending to channel 2 on the 202. Good Luck, Cody J.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I got behringer 802 audio mixer and a mic..what else do i need to start singing..
Please verify if your computer has a sound card. You will need a provision on your computer for audio input. Let me know.
Read full answer
Dec 26, 2014 • Behringer XENYX 802 Mixer
0helpful
1answer

Please can you tell me the difference?
The microphone preamps are different. The Xenyx has lower noise mic preamps.
Read full answer
Nov 04, 2013 • Behringer Eurorack Ub802 - Ultra Low-Noise...
1helpful
1answer

I cant get sound from fx send to my computer
Open the volume mixer on the pc and make sure the mic port is on. When you find it, click on the "advance" tab and there will be a check box allowing you to add 4db to the volume of the mic. Also, make sure it is plugged into the line in or mic input on pc.
Read full answer
Mar 16, 2013 • Behringer XENYX 802 Mixer
1helpful
1answer

My behringer xenyx 802 premium 8-input mixer worked fine for 1 day but now it sounds watery and behringer support was no help at all
Sounds like it may have failed. Yes, it is likely that it needs to be returned. Another option is to unplug all inputs and outputs. Plug in ONE device into the board, and use the headphone jack on the board. Does it sound the same? Just basic troubleshooting may help.
Read full answer
Oct 02, 2012 • Behringer Xenyx 802 8-input 2-bus Mixer W/...
0helpful
1answer

How can i connect a Behringer xenyx 802 mixer to a Fisher TAD 9315
What you've done should have worked on the video input. The phono will not sound like you'd want. Have you made sure the mixer is working correctly by trying it plugged into a different amp using the same outputs and cable?
Read full answer
Mar 14, 2017 • Music
0helpful
1answer

I'm looking to run 5 live instruments through the behringer xenyx 802, is this possible? Would the split channels force the instruments to pan? Any help would be much appreciated?
You could use the Left inout of one of the stereo channels. You can pan it with the balance control as needed... HOWEVER remember these are LINE LEVEL signal levels into the stereo jacks... so if you are using instruments with low output you MIGHT have to use a preamp to go into these jacks. Try it... nothing ventured, nothing gained. Using a keyboard into these jacks would NOT be a problem.
Read full answer
Sep 01, 2011 • Behringer Xenyx 802 8-input 2-bus Mixer W/...
0helpful
1answer

Low output on preamp
There are many "preamps" within this unit. Can you describe the exact setup and symptoms you are seeing this. Also describe the cabling ie, balanced... etc.
Read full answer
Jul 22, 2011 • Behringer Xenyx Xl2400 Premium 24 Input 4...
0helpful
1answer

I used my Behringer 802 mixer for the first time lastnight and when i woke up this morning and tried to record,the sound was very distant and hardly audible.I tried to raise the volume by turning the main...
What are you recording from? If using a condenser mic and you fail to turn on the Phantom power, symptoms such as you describe would occur. You don't include enough information about your setup to allow us to help.
Read full answer
Jun 27, 2011 • Behringer XENYX 1002B Mixer
0helpful
1answer

Hi all i own a behringer XENYX 802 audio mixer. this device is powered by a power supply that as input to the mixer gives 18,5 x2 Ac, 150ma. i would like to know in which point of the circuit i can...
You would need TWO DC supplies as they use AC so they can create both a plus and minus 15 volt power source to run the internal op amps.

Here is a schematic for the 1202 which has same power supply configuration as the 802.

http://elektrotanya.com/behringer_xenyx_1202.pdf/download.html

Scroll down to the little link "Get Manual" and download the service manual and schematic. You will find the power input in the upper left corner of page 5.
Read full answer
Mar 29, 2011 • Behringer Xenyx 802 8-input 2-bus Mixer W/...
0helpful
1answer

Is there a reset button on my 802?
I do not remember if the powersupply is external or not either way there is no reset button the powersupply may not be putting out any voltage.
Read full answer
Dec 01, 2010 • Behringer Xenyx 802 8-input 2-bus Mixer W/...
Not finding what you are looking for?

View Most Popular

Xenyx 802 8-input 2-bus Mixer W/ British Eq !

  • Music

Related Question

I got behringer 802 audio mixer and a mic..what else do i need to start singing..

  • Behringer XENYX 802 Mixer

Related Topics

631 views

Ask a Question

Usually answered in minutes!

Popular Questions

Please, I need a Behringer xenyx 1202fx list of

Behringer Xenyx 1002fx Mixer 10...

Where can i get a behringer b2031a schematic

Behringer B3031A 2-Way Active Studio...

I have a behringer eurolive b212d no power no

Behringer B212D Powered Speaker (550...

Right output channel not working on main mixer

Behringer Music

Reset to factory default settings

Behringer Eurolight Lc2412 24channel...

Top Behringer Music Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...