Does canon pixma mx 310 work faxing page up or page down?

Hi there,

Sure you can. Canon MX 310 supports Mac OS X. Just click on the link below to go to canon's download page.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310


Just click Drivers and Software link and choose for your OS from the dropdown link.

Hope this helps. Thank you for using FixYa.

Line from the wall goes to the L slot, the telephone goes to the other telephone slot, although you do not need a telephone for the fax to work.

If your Canon MX-310 has been set up to print faxes as they are received, then what is actually in memory is a "received fax report". If you select a particular fax in this report, it will print the first page of the fax to remind you of the content.

Your Canon MX-310 will store fax documents in memory if:

• Ink is low or has run out
• The paper size and type is not set correctly
• Paper has run out
• The Output Tray is closed

no both are different
Here are the list of cartridges u can use
MP210
PG-30 Pigment Black
PG-30 Pigment Black Ink Cartridge
PG-40 BLACK
CL-31 Color FINE Ink Cartridge
CL-41 Color
MP240
PG-210 Black Cartridge
CL-211XL Color Cartridge
CL-211 Color Cartridge
PG-210 XL Black Cartridge

try here


http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SNAModelSuppliesTabAct&fcategoryid=832&modelid=15603#SupportDetailAct

There are two buttons on the MX310... one for colour and one for black & white.. Depending on which mode you're using (ie: copy, fax, etc..) these buttons will copy, fax, etc...in either colour or black & white accordingly.

These buttons are located on the far right of the control panel with colour closest to the user, black & white above that and then the stop button above and right.

To fax in black & white (or mono as it's otherwise called) just choose the Fax mod, then press the Black button and you're away...

Hope that helps.

With the document open, you click Print, then choose Cannon ...Fax.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=15603

Is your call waiting on? take it off and see what happens.

This really worked with my MX 310:  http://www.fixya.com/support/t378057-reset_ink_levels_canon_mx310

enter rx settings and select teleline as fax priority.