I have just bought a new sam4 sps2000, when i press the cash key, a flashing line appears across the screen. also sometimes i have to press hard the buttons for it to register, is this normal for a new machine

To set the SAM4S ER-380 cash register to automatically print a second copy of the receipt after a transaction, you need to follow these steps:

1. Turn on the cash register and press the MODE key until you see the REG mode.
2. Press the PROGRAM key and enter your password (the default password is 0000).
3. Press the 3 key for PRINTING.
4. Press the 1 key for RECEIPT.
5. Press the 3 key for AFTER PRINT.
6. Press the 1 key for DUP (Duplicate Print).
7. Press the CASH key to save your changes.

Now, the cash register will automatically print a duplicate receipt after each transaction.

Question edited to add Maker.

Operation and Programming Manual - Goodson Imports

https://www.goodson.com.au > ER-180U_ume
PDF
The drawer will open and the cash change will be computed. CLEAR. Press to clear numeric errors made on keyboard prior to pressing the registration key. Also.
92 pages

Sam4s ER-180U Series Operation And Programming Manual

https://www.manualslib.com > ... > ER-180U Series
Ensure the mode is in REG position • Press the #/NO SALE key to open cash drawer • Count the actual sum of cash • Ensure the mode is in X position •... Page 43 ...

• 
  

  Open Drawer; Non Add Number - Sam4s ER-180T Operation ...

  https://www.manualslib.com > manual > Sam4s-Er-180t
  number, enter the number and press the #/NS key before totaling the sale with the CHARGE key. 1. Register the items you wish to sell. ... will print as in the ...

Hi Teresa

Press Clear Key

You pressed incorrect key sequence
These videos might help

HOW TO CLEAR THE WARNING SEQUENCE ERROR MESSAGE FROM THE SAM4S NR 510 CASH...


Sam4S ER 180 Cash register Installation

Sam4s ER 260 Cash Register Tills Epos Promotional Video

About 19,300 results (0.76 seconds) Search Results

[PDF]SAM4s SPS 2000 Operator Manual - Free Cash Register Help

www.cashregisterhelp.com/files/sps2000_op_manual.pdf
Mar 8, 2005 - This manual is subject to change without notice and CRS, Inc. has no ...Check with your local solid waste officials for details concerning recycling options or proper .... Function Key Definitions . ...... Get Gift Card Balance .

SAM4S 900 Series ' Electronic Office LLC

electronicbiz.com > Point of Sale Systems > Cash Registers
With 150 key locations, the fl at, spill-resistant keyboard can easily ... Where menuschange daily with breakfast, lunch or dinner times the paper key-sheet under the overlay is ... A simplifi ed check tracking feature is available for bars and cafes. ... The ER-900 Series is electronic payment and gift card processing ready - no ...

Cash Register Help: SAM4s ER-650 Cash Register

cashregisterhelp.blogspot.com/2008/05/sam4s-er-650-cash-register.html
May 1, 2008 - You will not find an easier cash register to program then the ER-650 or ER-650R register. .... i have er 650 and I tried to change my function key and change.... Don't forget if to check here is you need a new NEW SAM4s Cash Register ...... OK you can add a payment type and a new PLU to sell the gift cards ...

[PDF]ER-5215M Manual

www.ebs4pos.com/Registers/pdfs/5215mManual.pdf
This manual is subject to change without notice and CRS, Inc. has no obligation to

ER180T - Step 2 - Reset Machine (Data will be Deleted ...

? 2:29
https://www.youtube.com/watch?v=bn-7XGO0u1s
Mar 4, 2013 - Uploaded by HotPOSHelp
It is very important to Reset the Cash Register before you begin programming. This Reset process will also ...

Sam4S ER-180 Cash register Installation - YouTube

? 3:46
https://www.youtube.com/watch?v=EPA6YegOxqg
Aug 31, 2010 - Uploaded by cashregistergroup
How does one get to change the decimal places on a ER-180 to suit one's operational needs? I don't seem to get it from the manual ...

Sam4s ER-180T Cash Register Repair Questions - Fixya

www.fixya.com > Forum > Calculators > Sam4s

Cash Register Help: SAM4s ER-650 Cash Register

cashregisterhelp.blogspot.com/2008/05/sam4s-er-650-cash-register.html

May 1, 2008 - I really like the SAM4s ER-650 Cash Register and ER-650R Cash Register. ... By the way the SAM4s ER-650 and ER-650R is the same as the Samsung ER-650 and ... I can't seem to figure out how to program it to track ticket/check #'s. .....also, neither the Reg Key or Mode Key will turn to SM mode. help?

Samsung Cash Registers ' ER650 Bar Code Scanner ...

www.maxperience.com > ... > Cash Registers

If not, you will need to go to the SM mode and configure either RS-232 port 1 or port 2... Press enter (cash key) through the rest of the options. ... I could not get the curserinto the plu numeric field once i entered the plu. .... There are manuals for the SAM4s ER-650 at http://www.cashregisterguys.com and if you are looking for ...

Samsung Cash Registers ' Samsung ER 650 Deleting PLUs ...

Punch in the customer cash amount he is giving to you and then press "cash tend"


ACP ONLINE

Turn key to "PGM"
Press "7"
From the
LOGO DESC. PROGRAM screen, press "0" to display the PREAMBLE screen:
Using the alpha numeric keyboard overlay, type the first line of the message.
Each line (6 allowed) can be up to 32 characters, although only the last 19 characters you have entered will display. If you make a mistake, press the "BACKSPACE" key to erase the previous character. After you have completed typing the first line, press "ENTER"
to accept the new line and advance to the second line, or press
"ESC"
to return to the LOGO DESC. PROGRAM screen without making any changes.


Thank You
Team
ACP ONLINE

turn your key to PRG press 700 then sub/total then press 1(for line number) then press x/time then type in the new name. then press subtotal. press 2 for line 2 then x/time and type in your details and so on

Using the 'P' key, 'C' key turn the key to the PROG position, PRESS the 0 (zero) key and then 0 (zero). At this point, press the key of the item that you wish to change or Enter the PLU # and press the PLU Key. If the description of the item is ok then press 'cash/enter' and then press it again. You should be on the PRICE/Halo line, Change the amount to the correct amount and press cash/enter at this point you can then press the clear key and then turn the key to the 'REG' Position. Press the Key of the item you changed and it should display the new price.