Question about Dacor ECS130 Epicure Electric Single Oven

1 Answer

Oven started making a clicking noise after I started the self-cleaning process. Continued until "F8" flashed next to the clock. When canceled was pressed, the clicking started again. As a result I turned off the circuit breaker for the oven.

Posted by nikkasasha on

Ad

1 Answer

ashburton

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

F8 means a fault on the door locking switch.

Something may be preventing the door lock from operating properly.

The solution is to have the door lock switch and wiring checked over.

Posted on Dec 13, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jenn air wall oven will not begin the self cleaning process. I've followed the directions in the owner manual. The process stops after I close the oven door. The door is not locking


good don't use it,more ovens get damaged when the self clean feature is used,the oven gets up to 1000 degrees and the heat can damage the electronics in the oven,after seeing all the ovens that get damaged i tell customers not to use it use easy off instead,i will never self clean an oven again,one more thing if you do get it to work don't use it before the holidays use it after just in case something does happen you might not be able to get any parts in time to repair it till after the holidays,usually it takes out the clock assy. and this isn't just a clock that's a computer board built in with the clock and this runs the oven,a lady self cleaned her oven the day before thanksgiving and her oven is old,they don't make the clock assy. anymore and she couldn't get a new oven in time either so this could be a blessing for you.if the oven works leave it alone and clean it after the holidays,if you want to fix it write back in but you need to send the model number off of the oven.good luck.

Dec 17, 2017 | Ovens

1 Answer

Electrolux Icon Oven self cleaning won't start- the lock button keeps flashing. Yes, the racks and rack holders are removed.


Good Afternoon Friend,

I understand that you are having trouble with your Electrolux Icon oven, model# E30SO75ESS, and running the self-clean cycle. I see that the lock button keeps flashing and that you have the racks and rack holders out. I suggest following the steps below to run your self-clean cycle:

    1) Place the rack holders and the racks in your oven.

    2) Reset your appliance, by shutting the power off at your homes circuit breaker, for 3-5 minutes.

    3) Restore power.

    4) Reset the clock, by pressing the "Clock" button then press the number "2". Enter in the time of day, and then press the "Clock" button again.

    5) Start the self-clean cycle with the racks in your range. This is to make your oven recognize that the racks are in the oven.

    6) Take the racks and rack holders out and start the self-clean cycle again.

    I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your oven status has changed successfully.

    -Best Regards-
    WP

May 18, 2014 | Electrolux ICON Designer E30SO75ESS Oven

1 Answer

I have misplaced the manual for my oven and I need the self cleaning instructions. Model # RF365PXDQ0 Serial # FE2007966


First remove the racks, broiler pan (complete) and any aluminum foil that is in the oven. Hand clean any large deposits inside the oven. Use a non-abrasive cleanser, not an oven cleaner. Clean around the door frame and the edge of the door (outside of the gasket) with hot water and detergent. Close the door to the oven and make sure there are no plastic utensils near the vent of the oven. Make sure that your kitchen is well ventilated.

Next move the lock lever to the right. Set the Oven Selector and Oven Temperature both to Clean. Make sure that the clock, Start and Stop times are set to the correct time. Then push in and turn the Stop time knob clockwise to 3 hours (normal cycle). Make sure the Start time knob is not pushed in. Now wait for the cleaning cycle to be completed and for the oven to cool down. The lock lever can not be moved back to the left until the oven is cool. Forcing it will break it. Turn the Oven Selector and the Oven Temperature knobs to Off.

The manual is available here: http://www.kitchenaid.ca/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%203189075.pdf . If the direct link doesn't work, start here: http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=WHRCOM and enter the model number and then click Go.

I hope this helps.

Cindy Wells

Apr 27, 2011 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

I turned on the cleaning switch for my self cleaning wall oven and now it seems to be finished but mthe door lock is still on and the oven keeps making a buzzing noise what do I do?


If the lock does not open after the oven has cooled down, then try this: First, unplug the range or shut off the circuit breaker for ten minutes. Plug the range back in or turn on the circuit breaker. Set the clock and try moving the door lock lever or opening the door. Next, set the self-clean cycle again and only allow it to work for twenty minutes. Cancel the self-clean cycle and allow the oven to cool. Gently try moving the door lock lever or opening the door

Mar 13, 2010 | Frigidaire 27 in. Electric Double...

1 Answer

F8 Displayed


F1 Electronic oven control failure Replace electronic oven control (also called EOC or clock).

Apr 01, 2009 | Frigidaire 27 in. Electric Gallery Pro...

1 Answer

Jennair single oven...


Hey marygilfilen

F8 error is associated system failure. I suggest you need to replace your clock (controller)

Regards

Aug 19, 2008 | Jenn-Air JJW8130D Electric Single Oven

1 Answer

Beeping sound and f8 displayed


F8 means to replace the elctronice range control board. Evidently the power failure caused damage to the board.

May 24, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Error Code F8


F8 Analog/Digital supervisory Replace clock assembly (also called the ERC)

ohhh thats not good, escpeccially with company coming, replacing the clock appox 175 for part, def wont happen by tommorow nad no you cant separate the 2 ovens both ae wired together

Mar 15, 2008 | Jenn-Air JJW8230D Electric Double Oven

Not finding what you are looking for?
Dacor ECS130 Epicure Electric Single Oven Logo

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Paul Bade

Level 3 Expert

1666 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

ray gallant

Level 3 Expert

69153 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...