Question about Sony DSC-T30 Digital Camera
Just did what "dcamille84" said to my Sony DSC-T30 and the error message went away - CRAZY! Unfortunately, I already bought a replacement camera though (was only 100 bucks new).
Posted on Apr 29, 2014
SOURCE: Sony DSC-T100
Well I can't tell you what E:62:11 means and why it disappears when memory is taken out, however I experienced this
same problem with my DSC t-100 but mine did not go away no matter what i did, I looked around online for some
solutions I found this one site
basically what many people said was the error was probably due to focusing problems if you may have dropped the camera before. On the site they recommended to hit the camera lightly on the side where the battery is located, while the camera is booting up. I did this, and to my surprise IT ACTUALLY WORKED! I couldn't believe it but the error message is gone, and I haven't seen it since. Hope this helps.
Posted on Feb 15, 2009
Hello, this error message means that there is an melfunction in angular velocity sensor, peripheral cicuits. Simply speaking steady shot function does not work well. Please contact nearest Sony Dealer. Best regards, Arpi
Posted on Jun 11, 2007
SOURCE: Error code E:62:20 meaning
This appears to be a problem with a connector inside the camera. Try:
Posted on Apr 14, 2008
Tips for a great answer:
Usually answered in minutes!