How to connect a hifi to a 42 " lcd tv so i can use aux on hifi . which audio connection on the tv do i use?

If you connect the Main 1/4" out on the front to you HiFi aux input it should work. You will need to play with the volume controls to set the proper level so as not to overload the aux buss. The XR-600B manual is here-
Peavey XR 600B Operating Manual Page 4

Depending on what model tv and dvd player you have, it will be either HDMI (one cable for audio/video), RCA Yellow(video) red/white (audio), or Composite (3 for video and 2 for audio). Make sure you connect the cable you choose to the INPUT of your tv and then you have to use your tv remote to change the input (ex: hdmi 1, or aux, video 1 etc) depending on your model and input you choose.

reset it

Those on your hifi might be out put check your connections again

hi,
do the following.
1. connect ur blue rays hdmi out to ur tvs hdmi input.
2. connct blue rays out to any one of the coaxial(aux) input of bose.
3. connect ur tvs optical audio output to optical audio input of bose
4. connect monitor out of ur bose to any one of ur av in of ur tv. connect component video to better quality .
4 . in the blue rays audio setup select audio output priority as optical/coaxial
5 . in bose set aux as digital input.
to see blue ray select hdmi of ur tv, sellect in bose in which the blue rays coaxial is connected(aux) insert disk in blue ray an watch
to see dvd in bose select tvs corresponding input, select bose to dvd . insert dvd and watch
to whach tv program set tv to corresponding mode. set bose to optical audio input mode.
ok

You can't connect speakers to the TV. You will need a Audio Receiver to connect the speakers and TV to.

If you do not have a manual for the machine down load one at http://www.samsung.com/us/support/downloads/LN32B460B2D

It will show you how to set up a Home Theater Connection

Connecting an Amplifier / DVD Home Theater

TV Rear Panel

1 Audio Cable (Not supplied)

Amplifier/DVD Home Theater

1 Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and Audio Input jacks on the

Amplifier / DVD Home Theater.

When an audio amplifier is connected

to the AUDIO OUT [R-AUDIO-L]

jacks: Decrease the volume of the TV

and adjust the volume level with the

Amplifier's volume control.

Each Amplifier/DVD Home Theater has

a different back panel configuration.

When connecting an Amplifier/DVD

Home Theater, match the color of the

connection terminal to the cable.

?

?
?

if you want the sound from tv, get an audio cable and put one end to computer where the speakers connected and the other to the audio input or aux in back of tv.

good luck hope it works, if so do rate the solution

If you have HDMI cable and slots, please connect.
Also connect AVI.
It will work

purchase an sterio audio cable for computer out put. connect it to the computer output sond, and the on the other side connect to both pin in aux. then play sond and press the aux button of your dech samsung_max_945d.


i have this manual, i you need just tell me than i will email. to you.