Question about Samsung HT-X50 System

Samsung ht-z310 home cinema no sound rear speakers

Hey just got it out box installed it correcty used my wireless reciever transmitter for rear speakers and no sound comes out in test tone all the other speakers working ok

Anonymous Jul 05, 2008

I am having the same problem. I followed the instructions from the manual to try to link the surround sound module to the receiver and still nothing.

1 Answer

Anonymous

I seen the same thing when I first opened mine except my "center" speaker wan't working. It had to do with the "Mode" it was in. The Mode button at the botoom of the remote changes the speaker configuration.

There is also an option in the setup that allows you to turn on/off speakers for the system, all of mine were either Present or Small which enables them to work.

Posted on Aug 11, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Need help with SSI Cineplex 1500 Home Theater hook up..have all speakerwires hooked up,have 2 wire rca cable hooked up to input on system,going to output on satellite reciever, whaen I hit test tone I hear...

Hi, Hiss soundare from RCA cables.You need to reconnect again,but using a different cable for connection.

And also sometimes home theater acts that way during test mode, Check the manual and you will see how to set the home theater to see the mode that will allow all speakers to work. It's a normal thing when connecting a newly bought home theater.It the settings.Use the manual.

Take care.

Jul 07, 2010 | Audio Players & Recorders

3 Answers

No sound or power

IF ALL WIRES ARE CORRECTLY BEEN SETUP OR INSTALLED THEN THE NEXT STEP IS TO CONFIGURE THE SYSTEM TO WORK ON ALL SPEAKERS...

Before the setup of the speakers' channels

Press the SURR. button on the remote to select multichannel surround mode before adjusting the speaker settings.
In case of sound distortion, press and hold the SOUND button to select another transmission channel for the wireless rear speakers.

Setting Speakers' Channels

Press to stop playback, then press SYSTEM MENU.
Press repeatedly to select { Audio Setup Page }.
Press to highlight { Speaker Setup Page }, then press .
Enter its submenu by pressing .
Press to highlight one of the options below at a time, then press .
- { Speakers Volume } – Volume level setting for individual speakers (-6dB – +6dB).
- { Speakers Delay } – Delay times setting in relation to the listening position/ distance for centre and surround speakers.
Press to adjust to the setting that best suit your surround sound needs.
Press OK to confirm.

Notes:

1 ms increase/decrease of delay time is equivalent to 30 cm change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
The test tone will automatically be generated to help you judge the sound level of each speaker.

Jan 27, 2008 | Philips Cineos HTS9800W System

1 Answer

Philips LX3950W - no signal to rear speakers

check to se if your reciever channel number is set to the same as your transmitter channel number. press and hold down sound butten on remote to set transmitter number .set reciever number button on reciever unit. try setting both to number 4.

Dec 29, 2009 | Philips LX3950W System

1 Answer

Sound coming out of wrong speakers

I know nothing about your model but the very first thing that I would do is to pull the power cord from the wall outlet for at least 10 minutes and then plug it back in. This may reset everything.

Apr 15, 2017 | Pioneer VSX-D608 Receiver

1 Answer

No sound from rear speakers on the lifestyle 18

The SL2 works in such a way that the speaker satellite out put from the bass modules is fed to the input of the SL2 transmitter (remember, transmitter) then the sattellitespeakers are connected at the other end of the room to the receiver. An initial blinking green light should be seen and once the system is turned on this turns into steady green. Both the SL2 transmitter and receiver operates via WIFI.

Glad to be of service...

Dec 21, 2008 | Bose Lifestyle 18 System

1 Answer

No sound from wireless left and right rear speakers

change the batterys

Nov 22, 2008 | Panasonic Home Theater System System

2 Answers

Wireless speakers

You should have two pieces for your wireless rear speakers setup. A. a wireless card inserted behind the all in one receiver. B. the receiving box that will connect to the 2 rear speakers.Also,you should not have any obstacles to block off the line of site for the rear speaker receiving box to the wireless card.
Best way to test it is too simply leave the rear speakers connected to the rear speakers receiving box on the floor near the a/v receiver with dvd player built in.Play a dvd and see if you have sound coming out from the rear.
solutiondoct

Nov 01, 2008 | Panasonic Home Theater System System

1 Answer

Panasonic home theater system pt760

Make sure you have put the transmitter for the wirless speaker in the slot on the back of the reciever, it is a slim white device that is about 3 to 5 inches long?? and maybe half an inch thick. and make sure it is put in the right way.

Then make sure the wireless speaker is plugged in to the wall outlet.

If this does not work for you it may require being taken in to an authorized panasonic service center. when one part of the wireless system fails (transmitter or reciever) they both must be replaced. they are not interchangable from one panasonic to another.
They have a code in each unit that lets the wireless speaker that came with it only work with the reciever it was sold with.

I have even seen times where the store that sells them swapped the transmitters of two units and then they had two customers very mad at them because the wireless speakers did not work for either person.

Let me know if I can be of any more help.

Jun 08, 2008 | Panasonic Home Theater System System

1 Answer

Cant connect rear speakers

Hey there Subaquakid, the nature of surround systems is to identify separate extra channels of information and send them to the right address, being the selected speaker. In order for the rear speakers to work they need to be sent a signal. The media which you are using may not have the rear channel encoded. therefore the rear speakers have nothing to announce. Please ensure your source cd has the suround feature encoded. Hope this helps. Good Luck!

Jan 28, 2008 | Dell WL6000 Computer Speakers

1 Answer

My panasonic wireless surround sound won't work out of the Rear speakers

I have finally got my rear speakers to work. wireless internet or cordless phones will stop the speakers from working, i switched off my wireless internet and hey presto speakers work fine, i just cant have both at the same time.

Jan 20, 2007 | Panasonic DMR-E50 DVD Recorder