Question about Brother DCP-330C All-In-One InkJet Printer

1 Answer

Error code 51 how to reset? - Brother DCP-330C All-In-One InkJet Printer

Posted by sveinsorense on

Ad

1 Answer

patola

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 47 Answers

The printer does not work due to a paper jam or some sensor problem.

Solution: Clear the paper jam. If the problem still continues after clearing the paper jam, try to clean the encoder strip behind the printer head

Please Visit:
http://pcmediks.blogspot.com

Posted on Dec 09, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 51 Denon Professional DN-981F Minidisc player


It is not always the machine. Sometimes it is a bad disc ... or a batch of them if they are from Memorex.

Do the MDs play on other machines?

Nov 05, 2014 | Denon Audio Players & Recorders

1 Answer

E03-51 error on dp 6030


Hello Sir; the error code you indicated is corona wire problem, check the charge & discharge unit the corona wire is broken or not, replace it if it does.

Oct 06, 2012 | Office Equipment & Supplies

1 Answer

Canon Pixma MP210 will not recognize high yield PG-50 & CL-51 cartridges.


The canon pixma mp 210 uses PG-30, CL-31, PG-40, CL-41
It will not recognized the PG-50 & CL- 51
See if you can return it and exchange it for the PG-40 & CL-41.
If not, the only other way is to transfer the ink into the other ink cartridges.
The cartridge cap can be removed by a sharp tap at the back end of the cover.
You can glue back the cover.
If there is an E 1,6 Error code, Ink has run out after you install your ink cartridges
Press and hold the stop/reset button for about 10 seconds to clear the error code.

Dec 24, 2010 | Canon Office Equipment & Supplies

1 Answer

12 51 55 codigo de error


12 just means the system was reset recently 55 mean end of codes so don't worry about them 2 however code 51 is an oxygen sensor error (O2 Sensor) a bad or shorted O2 sensor can cause it to run very bad and get poor gas mileage.

Nov 10, 2010 | 1994 Jeep Grand Cherokee

2 Answers

Have an Error 51 on Brother MFC-210C all in one printer?


I can help you with your Brother MFC-210C error 51 problem.

Error 51 refers to a paper jam error.
Clear the paper jam to clear the error code.
If the error code will not clear after clearing the jam, resetting and powering off, the printer may require service.

I hope that helps.

Aug 30, 2010 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Error code 51? F & F intuitive washer


Hi just read your posting.Error code 51 means you have a Recirculation Fault.This means while the machine is filling or washing it loses water.Error code 37 means you have Pump Block error which means the machine is not draining.Please look under the machine to the front right and you should see a pump with a red or black fan attached.Can you confirm this please? I think there is a problem with your diverter valve and the information on your type of pump will help me rectify this problem for you.Please reply with additional information on the type of pump in your machine.Looking forward to your reply.

Jul 01, 2010 | Fisher and Paykel Washing Machines

1 Answer

I cannot print or copy . i see error 51


Error 51 is a paper jam code. Remove the paper tray in the front and the jam clear cover in the back (the light gray plastic piece in the center of the rear of the printer) and pull out any paper you can see.

Once you've removed the paper, the jam code should clear on the display, but if it doesn't, try resetting the machine. If the jam code is still there, that means there is still paper somewhere inside the machine. Check again to make sure you didn't miss any, and also lift the scanner bed to see if you can see any paper under there. (To lift the scanner, lift up with the tabs on either side until the scanner locks into place.)

Jun 03, 2010 | Brother Multi-Function Center MFC-240C...

2 Answers

Unable to print machine error 51, brother mfc-5440cn


I got the error 51 once and it turned out the connector to the ink holder was loose so i put it in and error gone.If this not help you need clean the encoder strip.

Oct 04, 2009 | Brother MFC-5440CN All-In-One InkJet...

1 Answer

I have a Change Unable 51 Error Message on my Brother MFC-260c MFC and it says to refer to User's Guide, how4ever there is no error code to match this in the guide. HELP!


hi karn..you need to disasemble your printer and clean your Maintenance unit....the coz of this error 51 is usually you are using competetor ink and then you have reset the counter (error 46) ,after you reset it, you need to change ink absorber if not it will bank those waste ink in the ink absorber and after it is full the waste ink have no place to store and it will jam the mantenance unit and the worse case it the ink maybe spoil other part of the printer go and find engineer  asap if not you need to replace new unit....

Mar 09, 2009 | Brother IntelliFax 1860C Plain Paper...

Not finding what you are looking for?
Brother DCP-330C All-In-One InkJet Printer Logo

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Cindy Wells

Level 3 Expert

6222 Answers

k24674

Level 3 Expert

8091 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...