You can reset the D-Link back to the default settings by -
Power off the D-Link, press and hold the RESET button at the back of the D-Link and power up the D-link, then release the reset button after approx 5 secs until the LEDs flash at the same time.
Connect a LAN cable from the D-Link to the LAN port on your computer
Then open a browser and enter the D-Link's configuration URL
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the admin password and configure the D-Link.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security
471 views
Usually answered in minutes!
×