Question about Toshiba 32AF41 32" TV

Color problem. No green anymore. What should I do?

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Master
668 Answers

Most of the problems like this is caused by the CRT socket pins needing to be resolderd. There is also a possibility that the CRT it's self could be bad but most of the time it is the socket.
I hope this helps,
skyassoc

Posted on Dec 08, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Just recently everything printed is some variation of a shade of green. Have tried to adjust color settings on the control panel of computer

Good day!clean the printer and the cartridge if it can change the color..if still not..replace with a good cartridge..if still..your printer head cannot mix anymore colors.

mastergani

Mar 21, 2010 | Canon Pixma iP6000D InkJet Photo Printer

1 Answer

Hitachi 61SDX01B Dark Picture and bad color

There isn't anything you can do yourself for this problem, but it should be worth having a qualified technician look at it.

Sep 09, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Hitachi 61SBX59B 61 inch has brightness and color problems

I would say the crt's are at the end of their life.

Sep 09, 2009 | Televison & Video

1 Answer

My Hitachi 61SDX01B 61 in is now too dark and doesn't seem to have depth in the picture anymore. I turn up the brightness and contrast to 100 just to try and make it better. But it just doesn't seem to...

It sounds like your fluid in the color guns is contaminated and you need to have it changed.

Sep 03, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Lexmark X75 won't print in colour anymore

When you print a color document do you get any color output ?. You may want to try to print a test color document, consisting of say Red, Green and Blue color blocks. If any of the blocks is missing you may want to replace your color cartridge.

Jun 01, 2009 | Lexmark X75 All-In-One InkJet Printer

1 Answer

Samsung PCL542R Manufactured in 2002 color is off

if you did not see the picture on the blue tube; that is your problem -- the drive signal is not getting to the video amp and the mixed color from the green tube and the red tube is giving you a different color wich is unnormal. a good picture is when the 3 crt are emitting the video

Oct 09, 2008 | Samsung HCL4715W 47" Rear Projection...

1 Answer

Blue color cannot be adjusted

there are two ics trhat control the three colors alignments. Its always recomended to replace both Convergence ICs at the same time when doing the repair as they both share the green color between the two ICs.

Sep 03, 2008 | Mitsubishi WS48511 48" Rear Projection...

1 Answer

Yellow hue

1)Please verify your model # from back of set......

2)Reduce the color to minimum or tune in a black & white chan.
you should see gray, not yellow hue

3)Remove lower front grill cover & access panel.....locate the
focus / screen control block...turn blue screen control slightly
CW......red,green and blue must mix to equal gray

4) reset color to normal level.......reassemble

Dec 22, 2007 | Toshiba 57H82 57" Rear Projection...

1 Answer

Color is gone in a sony kv-c2963e trinitron tv

as you say that color came back for 15 minutes then went off. this is a clear indication that there is a loose contact or pcb crack somewhere in color section only. if that happens to be ok then check 1 antena or cable socket loose 2 loose connector in color section 3 print open or crack near chroma signal processor. 4 loose near color control. 5 chroma ic night be defective. if you are not tech person take the help of tech.person.

Oct 01, 2007 | Televison & Video

1 Answer