No user manual. I cannot set the time or alarm please help asap

Question edited for clarity.
Question moved from Cars and Trucks to a Westclox one.

Contact them direct. I can't find one online

User Manuals - The WestClox Source

https://westcloxsource.com > user-manuals
User Manuals. Please contact us if you need a user manual or user guide that is not yet listed below. 2000 Deluxe Baby ...

Page 11 of the manual refers (complicated)

https://www.manualslib.com/manual/379730/Timex-T309tt.html?page=11#manual

An easier way would be to pull mains plug and remove the batteries for 5 minutes, reinsert, plug in and set the time.
..

Once the time is correct, users can move on to setting the alarm itself. Many iHome systems come with dual alarms allowing couples to set different times for each person or individuals to designate a weekday and weekend alarm. Each alarm has its own time, wake-to source, and frequency. The process of setting the alarm is the same for both options, the only difference is what button, either 1 or 2, users depress when setting it.

Once ready to set an alarm, users need to push and hold the button down, waiting for the alarm time to appear on the clock's display. From there, the up and down arrows or plus and minus buttons adjust the time backwards or forwards accordingly. Once that is complete, users select the frequency of the alarm by pressing the alarm button again and then opting for 7, 5, or 2, which correlates with all week, weekdays, and weekends respectively.

The final part to set is the wake source of the alarm. Users press alarm buttons one more time, and then use the same directional buttons to choose from iPhone and iPad on some models, radio, buzzer, or playlist. If users choose playlist, they must also setup a playlist within their Apple device titled iHome.

Because frequency is part of the alarm setting process, there is no need to turn on the iHome alarm manually as one would do with a normal alarm clock. However, users can check to see if the alarm is active by looking at the screen of the clock for the earliest alarm time, displayed on its lower part.
In the mornings, when the alarm sounds, users have two options: Snooze and disarm. The disarm process turns off the alarm until the next day in its frequency chain. Users disarm the alarm by pressing the power button. On the other hand, users must manually program the snooze button. Users do this by pressing and holding the snooze button and then toggling to the desired snooze time, generally between one and 29 minutes. Once this is set, users simply press the snooze button in the mornings to delay the replay of the alarm for that amount of time.

It's normal for the alarm to go off if it was set with the key fob and then unlocked with the metal key. The manual should explain this.

Please download the user's manual from here:

http://www.nodevice.com/user_manual/download_346371.html

Then read pages 14-15 for setting the time and pages 16-18 for setting the alarms. This guide is detailed and good enough.
Good luck!
Thanks.
gylacz

You can get the manual on the link below. Please alow time to load large file.

http://www.emersonradio.com/owners/SmartSet%20Series/CKS3528_110606.pdf

Good Luck and please rate 4 thumbs up for the free answer

You can download the user manual for your watch from this link(http://www.watchesmanuals.com/Armitron/Armitron-Sport-40-8125BLK-Watch.htm)

heres the user manuel file:///C:/Users/Administrator/Desktop/toad-a51s-a101-a201.pdf

alternitivly go to http://abacuscaralarms.co.uk/members

and download from there

hope i was helpfull

Here is how I set my ZENITH ZG120M radio alarm clock.

1) PRESS AND HOLD DOWN the HOUR BUTTON and then PRESS the TIME BUTTON to set the correct hour.
2) PRESS AND HOLD DOWN the MINUTE BUTTON and then PRESS the TIME BUTTON to set the correct minute.
To Set The Wake Up Time
1) PRESS and HOLD DOWN the SNOOZE/ALARM SET BUTTON and then PRESS the HOUR BUTTON to set the desired hour.
2) Press and HOLD DOWN the SNOOZE/ALARM SET BUTTON and then PRESS the MINUTE BUTTON to set the desired minute.
There are two light indicators that light up on the left side of the LED display...the top light indicator will come
on once the time turns to PM. The bottom light indicates the alarm is set.

Press 3 times left lower button, then select with right lower button what you want to adjust, then adjust with right upper button. To finish press left lower button again.