Question about Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

Open Question

HLN4365WX/XAA Trys to come on but turns back off and trys again then goes to two flashing green and one flashing red light. No sound or picture. Had a problem earlier with no picture with sound but could unplug tv and it would come back on when plugged back in and turned back on. Thanks

Posted by remarkss on


5 Related Answers

dewan nafees ahmed

  • 1894 Answers

SOURCE: Samsung HLS5087WX/XAA goes to red/green

does the power light blink in any regular way?

it may help us to decode what the problem is..

Posted on Jun 23, 2008



  • 240 Answers

SOURCE: no picture on samsung hlp5063wx/xaa

to test this set
unpug the 4 pin conector labeld + and _ 20v on the cg convergence module
if set turns on, the problem is that modual
replace bolth convergence IC'c stk392-040
also check all 3.9 ohm resistors and both pico fuses.

Posted on Jan 16, 2009



  • 1 Answer


Most Likely you need to replace your bulb. On Page 99 of the owners manuel is the LED indications chart. (you can download the manuel here) You are probably having indication number 3, which means the bulb is done. You can find new bulbs on Amazon and e-bay. I recommend you buy the Toshiba brand bulb and not a knock-off, I have heard that they may not last as long and do not look as good.

Posted on Jan 31, 2009


  • 147 Answers

SOURCE: TV won't stay on. Green & Red light timer-lamp (Green) stand by/temp (red) flash.

Most likely needs a new lamp. Easily done yourself.

Posted on Apr 15, 2009


  • 668 Answers

SOURCE: Sony 51 inch model kp-51hw40 Trouble code 8

A 8 blink code usually means there is a High Voltage issue. Replacing the "D" board fixes it most of the time. You could also have a HV Block that has failed. The only way to know for sure is to get a professional out there to check it out. A High Voltage problem is something you do not want to mess with.
Hope this helps,

Posted on Jul 20, 2009

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

SAMSUNG dlp tv wont come on..trys too them goes off before pic appears and flashes red and green light not light in middle..model is HLT5055WX/XAA

There are so many possibilities... If you are SURE that the lamp is good (did you take it out & look at it?) Easiest: When you turn on the tv, do you hear a 'whirring' sound coming from the back? If you do, is it a 'smooth' sound or is it rough, scratch, & noisy?. If it is smooth, or if there is no sound, next place to check is the power supply. If it is rough & noisy, it is a bad color wheel. Unless you REALLY know what you are doing, anything other than a lamp replacement should be left to a professional repair person.

Samuel Morris

Camtek Of NY Inc

I’m happy to help further over the phone at

Oct 12, 2014 | Samsung Hlt5055w

1 Answer

Have a toshiba theatrewide hd dlp. Replaced the lamp because the led indicators suggested to replace. Now the same thing occurs. TV trys to start up. the green light flashes repeatedly while the tv...

Most likely a defective digital module which is part of the light engine and cannot be bought separately. The average cost to replace the light engine assembly is around $800.00.

Apr 26, 2011 | Toshiba TheaterWide 52HM84 52" Rear...

1 Answer

First the red bulb light was flashing and there was no picture. So i replaced the burnt bulb. Now when i go to turn the tv on were the red light means off and the green light mean on (that light blinks 3...

Check Lamp Fan if it stops running when Lamp trys to Light ,Then Lamp will not Power up,or Ballast Board itis what powers Lamp on.
Encompass Parts Distribution 1-800-638-3328

Oct 06, 2010 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Tv turns off green light flashes twice and no

It trys to start but no picture? That means it's time to replace the lamp.

Apr 30, 2010 | Toshiba 62HM95 62" HDTV

4 Answers

Tv won't turn on. red power light is out

red light is on, but when the tv is turned on, it immediately shut down and goes back to the red light setting. It is like it blows a fuse or something to that effect.Post Solution

Mar 02, 2010 | LG 50PC3D 50 in. Plasma Television

1 Answer

The power keeps recyling

is it flashing green? most likely the bulb.

Amazon has them for around 150

SONY XL-2400 replacement bulb

Mar 02, 2009 | Sony KDF46E2000 46" Projection HDTV

1 Answer

Mitzibishi tv wd 65000

Hey Fy what do you mean by replacement lamp?? theres no such device in this set???The sets not turning on it could be a shorted horizontal output transistor and if thats been replaced and blown again then you probably have a bad flyback xformer. If thats what your refuring to then i dont have a clue what your saying as ythis set has only a picture tube??? Need more info please.

Apr 30, 2006 | Panasonic PV-DF2700 27 in. TV/VCR/DVD...

Not finding what you are looking for?
Samsung HLN4365W 43" Rear Projection HDTV-Ready Television Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides