Nokia 5320, when i start fone disply show blank so pls give me solution

gigaser A495 Handset ,
Actualy one problem may Handset Disply not work,Pls reply how to work in incoming and disply screen number.

Enter #interrupt c interrupt , respectively in the order in your machine then display will become blank enter 14 and after press start your machine will restart and most probably your problem will resolve, if not your heater lamp may become defective.

hi friend, may be your phone display have a problem.i recommend you. goto your nearest service center. they will surly fix your phone problem.




with Regards: Rakesh

when i turn on my fone, the screen remains blank but i am still able to press buttons into it. can you help?

you have to flash that fone, if you can do it yourself or give it to the people that unlock fone



rate this

May I ask if your fone may have fell into water, beverage, washing machine etc?

well, I believe that the reason for the loop is because the circuit has corroded and made contact with other parts of the mother-board. It may not be too late to see a cell-fone technician and have it cleaned out.

Hope this solves your problem. :)

how can i use gps data with my nokia 5320

plz change your lcd

Go to settings and memory. Will show how much being used and how much is free.

check this link under sharp


http://www.copier-help.com/copier-help/ecs/sharp/ecssf8500.html

good luck