I have lost the manual for my NTL VS205 it has a built in answer machine and when u call the home number it wont let u leave a message so i need to change the settings for this
can you help?
Drew
My VS205 hs stopped taking incoming calls or even ringing . I have a message on the screen saying "03 MSG" Where can i get a manual? on line would help.
Pat
There are two types of messages you can record onto your answer phone.
Type 1 plays your message and allows the caller to record their message for you to hear.
Type 2 plays your message but does not allow the caller to record a message.
-----------------------------------------------------------
To add your own type 1 outgoing message (OGM1) on the answer phone use the following proceedure as outlined in the manual.
From the VS205 handset
1) Press the clear/mute button - display = "TAD ON"
2) Press the 9 button then the 1 button - display = "91"
3) When you hear a beep speak your message into handset.
display = "REC OGM1". Note:- 30 seconds maximum.
4) Press 5 to stop the recording.
Your message will then play back to you.
display = "PLAY OGM1"
5) At the end of playback there will be a double beep.
The display will return to "TAD ON"
To Play/Check OGM1
1) Press Clear/Mute. Display = "TAD ON"
2) Press 6 then 1. Display = "PLAYOGM1"
Your OGM plays back inviting the caller to leave a message.
Note - To restore the pre-recorded OGM1 press "0" (Zero) at any time during playback. The display reverts to "TAD ON"
-----------------------------------------------------------
To add your own type 2 outgoing message (OGM2) on the answer phone use the following proceedure as outlined in the manual.
From the VS205 handset
1) Press the clear/mute button - display = "TAD ON"
2) Press the 9 button then the 2 button - display = "92"
3) When you hear a beep speak your message into handset.
display = "REC OGM2". Note:- 30 seconds maximum.
4) Press 5 to stop the recording.
Your message will then play back to you.
display = "PLAY OGM2"
5) At the end of playback there will be a double beep.
The display will return to "TAD ON"
To Play/Check OGM1
1) Press Clear/Mute. Display = "TAD ON"
2) Press 6 then 1. Display = "PLAYOGM2"
Your OGM plays back but should not invite the caller to leave a message.
Note - To restore the pre-recorded OGM2 press "0" (Zero) at any time during playback. The display reverts to "TAD ON"
Hope that helps.......
Here's a link for a manual.
http://www.instruction-manuals.co.uk/category/telephon/NTL.htm
Well after digging around for a few moments the only manual I could find was for a VS2003 model.
http://www.telephones4u.co.uk/userguides/VS2003.pdf
Take a look at that and see if it is at all related your model, i'll get back to you soon as I am going to see what else I can come up with.
Hope this helps
Lets see if I can get my hands on a manual. one moment
This is a common manual for the vs2 series This may be helpful to you
http://www.telephones4u.co.uk/userguides...
Let me know if you need further assistance or if the manual isn't helpful
Thank you,
Ekse
×
549 views
Usually answered in minutes!
×