Light inside comes on when the door is opened, but the control panel is completely inoperable

Microwaves need specialist repair. Take it to a Sub Zero, Wolf Service Centre or replace with MS24.

https://www.fixya.com/support/r29874712-repairing_microwave_ovens

Replace Standard Microwave Model MW24 with Model MS24

https://www.subzero-wolf.com > wolf > microwave-ovens
Find answers online to your Sub-Zero, Wolf, and Cove customer service questions here. Read about Replace Standard Microwave Model MW24 with Model MS24.

..

The control panel will cost more than a new microwave

The problem is on the control panel, which can be repaired economically.

There is a a YouTube video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Did this occur after a failure of your cooktop lights?

Or is there is buzzing noise present when the oven is not operating, or when the door is opened?

If so, then the problem is on the control panel, which can be repaired economically.

There is a a YouTube video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.


We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

We see (and repair) this a lot.

The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with a one-year repair guarantee.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Depending on the brand and full model number, it may.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

Also at our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

If you don't find yours, or if you want to look at it without disassembling the oven, you can download many brands' mini-manuals here.

Sometimes the problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with aone year guarantee.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

probably gonna have to replace your control panel

This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Door switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

If you someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

There may also be a "mini-manual" hidden inside the unit behind the control panel, which is very helpful when troubleshooting.

If you think the problem is on the control panel, we repair these nationwide by mail for $39.95 postpaid in most cases.

We're happy to help and we appreciate your thoughtful rating of our answer.

This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

If you someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

There should also be a "mini-manual" hidden inside the unit behind the control panel, which is very helpful when troubleshooting.

If you think the problem is on the control panel, which we repair these nationwide for $39.95 postpaid.

We're happy to help and we appreciate your thoughtful rating of our answer.

We see this a lot. The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

We see this a lot. This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, linked here on Fixya:
http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.