Question about Maytag Ensignia 3.3 cu. ft. Top Load Washer
Hello klj... Unscrew the cold hose from both ends and run a wire through the entire length to remove any blockage anywhere. Also check the connection locations looking for calcification of some kind. If it's clean, you probably have a defective water-inlet valve. If so, you need to replace the valve. Joe
Thanks for choosing Fixya!
Posted on Dec 06, 2010
Testimonial: "Thank you so much! I will try your suggestion."
Tips for a great answer:
Sep 13, 2010 | Washing Machines
Aug 03, 2010 | Whirlpool Washing Machines
May 28, 2010 | Washing Machines
Mar 14, 2010 | Washing Machines
Feb 03, 2010 | KitchenAid Washing Machines
Jul 23, 2009 | Admiral AW22 Top Load Washer
Jul 08, 2009 | Kenmore Washing Machines
Apr 29, 2009 | Washing Machines
Dec 02, 2008 | Kenmore 24032\24036 Top Load Washer
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: