Sylvania 6620LE 20 in. HD-Ready LCD Television Logo
Posted on Dec 04, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I came across a Sylvania 6620LE 20 in. HDTV and owner said it had some display problem. Said I could have it if I wanted it. Took it home, plugged it in and it has picture and sound. After about a second or less, the bottom half of the screen becomes distorted, left bottom quarter with vertical lines, and right bottom quarter with horizontal lines. I did a little research on the unit and I'm thinking it may be the LCD controller board. If so, the cost is incredibly low compared to the cost of a new lcd tv. Part is only going to cost me around 40-50 bucks. Just looking for a little confirmation that this in-fact could very well be the problem. Any input would be greatly appreciated. Thank you.

2 Answers

Chi Chu

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Sylvania Master 8,457 Answers
  • Posted on Dec 04, 2010
Chi Chu
Sylvania Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 01, 2009
Answers
8457
Questions
0
Helped
2820951
Points
26282

Yes,this problems it is 90% is the problems and the causes by the T-CON decoders board.10% could be the LCD screen panel itself it is shorted and dead also causes this problems.Tries websites like Shopjimmy.com,Ebay.com also have and sell these refurbish T-CON decoders board too.Tries it u have 90% of sucessfull rate.

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Master 691 Answers
  • Posted on Dec 05, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Nov 30, 2010
Answers
691
Questions
1
Helped
126550
Points
1740

Usually with section problems left and right, you need to find out about x-y sustain boards

  • Bud Martin
    Bud Martin Dec 06, 2010

    This is LCD TV, not Plasmas which uses X-Y sustain board.

  • Anonymous Feb 20, 2011

    No X or Y sustain boards in LCD. Please read the post carefully, or you will mislead someone. for the record Y and X boards are only found in PLASMA TVs.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to change the 'aspect ratio' sylvania lcd color tv 'model LCD260SS8'

See page no 20 TV Screen Display Mode of user manual
Download Sylvania LC260SS8 Owner's Manual ' ManualsLib
Follow the instructions for required aspect ration.
Oct 19, 2023 • The Optics
0helpful
1answer

My 42 inch sylvania hdtv screen is broken and not showing a picture

If the display panel (PLASMA DISPLAY PANEL--PDP) is damaged or broken etc it is fatal as the cost of the part alone will exceed the cost of a new set.
0helpful
1answer

How do set TV to "over the air " or "antenna"?

Hello
Just get into its setup window. Make an autotune function to it, after connecting it to external antenna. You can get all details by its user manual.
2helpful
1answer

My sylvania portable DVD player won't read discs the display says No Disc after the spin. What do I do?

I had same problem with a sylvania portable DVD: no disc. After cleaning the laser didn't work, I took the unit apart, and found that there is a small gear that moves the laser back and forth across the disc.. The gear could easily be misaligned with a rough bump along the drive.. All I did was realign the gear to the center where the disc was. Inside, there was even a small lever to pull back on to do this.. I also noticed a small Ribbon cable connecting the laser to the main board. Again, seemed nimble. I detached the ribbon, cleaned the connectors with alcohol and reattached. Happy to say, it works perfectly now. :). Good luck.
0helpful
1answer

SylvanIa tv model 6620LE remote control lost. Need remote code for GE univ remote 24993

Hello
Three digit universal remote codes for Sylvania are:
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 133/ 161/ 163 /062/004/009/135/189/227/456/008/068/075/141/161
Four digit universal remote codes for Sylvania are:
0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161
OK.
8helpful
3answers

My sylvania lc320sl1 won't turn on, the power light is red, blinks in green, but does not turn on. What should I do?

My sylvania 32 LC320SL1 HDTV tv will not turn on it stays in standby and when I click the power button the power light flash around ten times then the screen flashes on and says digital television in the bottom right then goes back into standby its make a click sound as it goes from power on to standy by
0helpful
1answer

I'm having trouble connecting the tv to my surround sound system. The surround system says to connect the cables to the "audio out." There doesn't seem to be an "audio out."

I checked Amazon, it says "For connections, you get 1 each composite- and S-video inputs for your DVD player, VCR, or other audio/video device, and a set of component-video inputs for your progressive-scan DVD player or DTV set-top box."

Your TV does not have a audio out since it is a smaller TV. You need to get a tuner and route the sound system through there.
1helpful
3answers

SYLVANIA 6620LG TV - DTV??

The ;quick answer is YES, you will need a converter box to receive digital broadcasts. This set has only an analog tuner built-in. That is why it is HDTV "ready" (ready for you to add a tuner).

As for HDTV vs EDTV it is a matter of resolution. Your set is capable of EDTV resolution, which is better than SDTV (standard definition TV) but not quite as good as HDTV. With a digital tuner you will be able to view all digital programming, even HD, and it will look excellent, though not quite as sharp as a set with higher definition.
0helpful
2answers

Sylvania 6620LCT

your t.v. defected have a tech repair your t.v.it is having a problem in the IF circuit.good luck
0helpful
2answers

Want to view all my tv channels

It sounds like a bad antenna but coming from a land of only 5 stations across the country it's hard to give an answer. BMW
Not finding what you are looking for?

284 views

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...