I have a motoroIa i465 cellfone. accidentally mistyped my pin unlock code number(1 too many times,i guess) and now just keep getting a pinblocked message when i turn on. Wont let m access anything. Says call 800 number, i did but since i wasnt original purchaser(bought on ebay) they said they cant(or wont!!!) help me. Any Ideas?

Using Unlock code you can unlock your Motorola Clutch i465 . To get the unlock code visit SuperUnlockCodes.com . There you have to give your Country and current network name along with your IMEI number to get the unlock code. They will give you the unlock code along with instructions on how to unlock. Follow the instructions and unlock your Motorola Clutch i465 .

u should talk to customer care of ur sim proveder company.he'll give u the puk code for ur cell phone and after typing that code u can use ur phone as usual ,bt trying more times to unlock the sim can also cause ur sim rejection problem .so just talk to the customer care.

These directions are for an AT and T phone, but other than that, are the same for any carrier. A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card. You can obtain your phone's PUK code from your carrier in one of these ways: Log in to Your account.online Use a Technical Support Chat Contact your carriers Customer Care Get Your Phone's PUK Code Online Go to the Phone/Device page. From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading. The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card. Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code. Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

try online sites

There are many methods for unlocking mobile phones, that is through software, codes,calculator,some tools , hardware and all ,but in that codes are best one, because it is easy to understand the instructions and enter into your mobile ,just give your IMEI number, country & network lock , then you can get the unlock code..........
For the good place to get the unlock code for your mobile phone, Just visit this site www.superunlockcodes.com/motorola-clutch-i465/rs12wp9, It provides the step by step instructions and simple methods for unlocking mobile phones at a safe way...........

The Motorola Locked in which Network in which Country?what is the IMEI Number,You can Unlock it using the Subsidy Code or Unlock code,get the Paid safe code from
Unlocking4u.com and unlock it step by step following the instruction below:then You can use it in any GSM NETWORK in Jamaica Country...

Motorola CLutch i465 Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Motorola CLutch i465 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola CLutch i465 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola CLutch i465 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola CLutch i465 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola CLutch i465 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!
Each Motorola CLutch i465 mobile phone has an unique unlock code. You can buy the unique unlock code for your Motorola CLutch i465 mobile phone using the form above.

My cord less Panasonic phone dial locked not able to dial please give solution how to normalise the dial lock.

U both have to give the same pin number. (Eg) If u give 00 he must also give the same 00. It will get connected.
Regards, Kesav

call your mobile service customer care number and ask your puk code from them...they will ask your last 4digit sim card number...give that number to them...they will give puk code ...use that code and continue your operation

Please go to service center and Unlocked your mobile Phone