When I connect my samsung monte c3200 phone with pc through cable it says USB device not recognised. I set it to seting > pc connection > ask on connection. Blue tooth is off. Already installed kies, samsung pc studio but nothing happens. Please tell me what should I do

First make sure you have the correct USB drivers for your phone installed on your pc. Go to device manager and see if your phone or mass storage device is listed. If not, download the drivers here, http://www.samsung.com/us/support/downloads. Make sure debugging on your phone is enabled. Please refer to the following:

1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".



2. Then drag the status bar down and tap on "USB connected".



3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".

A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Samsung Galaxy S2 (Android 4.0)

1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".



2. Then plug the USB cable into the device and connect to your computer.



3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".



4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Samsung Galaxy S2 (Android 2.3)

1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".




2. Then drag the status bar down and tap on "USB connected".




3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".




4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

Samsung Galaxy S2 (Android 4.0)

1. To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".




2. Then plug the USB cable into the device and connect to your computer.




3. The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".




4. A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.

It appears that your OS is not compatible with your phone and therefore your computer will not recognize the phone.

Hi,
Switch on the Mobile Internet from the settings->Wireless & Networks->Mobile Network->Data Enabled.[note: Connect the usb cable to the PC. Don't use it as Mass Storage.]
Enable USB Tethering from the settings->Wireless & Networks->Tethering & Portable hotspot->USB Tethering.Now you can browse from PC via Optimus.

Cheers,Mr.Maduraikaran.

just plug in the data cable from your phone to usb port on your laptop, then open setting from your phone and find pc connectivity then set as mass storage, it will detect your memory card of your phone to your pc, drag the music you want to my music folder in your memory card.

Please get it downloaded here : www.brothersoft.com/downloads/samsung-pc-suite.html
www.cell-phone-accessories.com/samsung-phone-software.html
www.samsung.com/uk/.../supportMain.do

check in your settings if its on modem or mass media storage mode.
setings > telephone settings > pc connection > ( modem;mass media storage; printer) >> choose mass media storage

let me know if it works.

Hi, you need a Samsung SCH-U450 Intensity USB Data Cable with Driver CD.

Just like this: http://www.bargaincell.com/samsung-sch-u450-intensity--usb-data-cable-with-driver-cdrom-p-24883.html?cPath=2830_2831_23492_23497

Hope this helps. Please help me also by voting and writing a testimonials. Thanks. :)

run again your pc studio cd software installer..
by default, it will play and give the swf home page where there is an option for install usb driver. select install usb driver in order to install your usb driver but before installation disconnect your phone from pc and remove the usb cable. once it's installed, right click your PC studio and select open automatically when device is connected.
>>on your phone, select settings,select settings for your pc connections, check ask for connections and reconnect your phone.

Not sure if you meant photo album or music album??? Here is the steps for both, music first:

Transfer music from a
computer
You can use the following methods to transfer
music:
● To install Nokia Music to manage and organise
your music files, download the PC software from
www.music.nokia.com/download, and follow
the instructions.
● To view your device on a computer as a mass
memory device where you can transfer any data
files, make the connection with a compatible USB
data cable or Bluetooth connectivity. If you are
using a USB data cable, select Mass storage as
the connection mode.
● To synchronise music with Windows Media
Player, connect a compatible USB data cable, and
select Media transfer as the connection mode.
To change the default USB connection mode, select
Menu > Settings and Connectivity > USB > USB
connection mode.

This works for music, photos, or video:
Select Menu > Settings and Connectivity >
USB.
To have the device
ask the purpose of
the connection
each time a
compatible data
cable is connected,
select Ask on connection > Yes.
If the Ask on connection option is turned off or you
want to change the mode during an active
connection, select USB connection mode and from
the following:
● PC Suite — Use Nokia PC applications such as
Nokia Ovi Suite, and Nokia Software Updater.
● Mass storage — Transfer data between your
device and a compatible PC.
● Image transfer — Print images with a
compatible printer.
● Media transfer — Synchronise music with Nokia
Music or Windows Media Player.

Here is the link for your manual online:
http://nds1.nokia.com/phones/files/guides/Nokia_N97-1_UG_en.pdf

there are 3 ways

1.
You can use the USB data cable to transfer data between
the device and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with
Nokia PC Suite.
To activate the device for data transfer or image
printing, connect the data cable. Confirm "USB data
cable connected. Select mode." and select from the
following options:
• Nokia mode — to use the device for PC Suite
• Printing & media — to use the device with a
PictBridge compatible printer or with your
compatible PC
• Data storage — to connect to a PC that does not
have Nokia software and use the device as a data
storage device
To change the USB mode, select Menu > Settings >
Connectivity > USB data cable and the desired USB
mode.

2.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity >
Bluetooth and from the following options:
• Bluetooth — Select On to activate the Bluetooth
function. indicates that Bluetooth is activated.
• My phone's visibility — to define how your device
is shown to other Bluetooth devices
• Search for audio enhancements — to search for
compatible Bluetooth audio devices. Select the
device that you want to connect to the phone.
• Active devices — to check which Bluetooth
connection is currently active
• Paired devices — to search for any Bluetooth device
in range. Select New to list any Bluetooth device in
range. Select a device and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16
characters) to pair the device to your device. You
must only give this passcode when you connect to
the device for the first time. Your device connects to
the other device, and you can start data transfer.
• My phone's name — to set the device name for
Bluetooth connections

3. Take off you microSC memory card then read directly to your computer


cheers!