Dan, the light blinks 9 times. Does that help any?
Yes. The 9 blinks indiate a problem in the power supply area. I need to look up your specific model later today to get you the specific parts. If you are comfortable with soldering and working inside the set, you should be able to repair this yourself.
Stay tuned...
Dan
This is not good enough solution. Can you suggest what is exactly wrong and why most of these Sony Wega's have this problem?
SOURCE: Sony TV stuck in stand by mode
the 9 blink code is caused by a bad diode on the pc board. The zero crossing detect circuit is not allowing the power supply to come on .
3,280 views
Usually answered in minutes!
Dan, Yes I can solder. I guess if I had to I could get another power supply board. Though with your assistance I'm confident I can fix this one.
Sony Wega Model KP-57WS520
TV will not come on on flashes stand by light.
Unplug overnight, and attempted to turn on the TV. I counted 6 blinks with no sucess.
Hello
My stand by/timer light is blinking red and will not allow me to turn on the tv. If I hit the power button it shuts off automatically.
Any feed back is greatly appreciated.
Marychris
sony tv model kv-36fs120 led blinking 9 times no power on?
I too have the KV-32FS120 and the set will not power on. I get 9 blinks when I try to turn it on. I have unplugged it for two days to reset and get the same result. Can you tell me what needs to be replaced? I have no proble soldering either.
Thanks
My 32" WOW Trinitron has a picture but it is on and off prompted by the standby light blinking 5 times. The tv is about 6 years old. What should I do? I cannot perform any technical repairs by myself. Thanks,
Janet C
timer light blinks nine times
BLINKS 9 TIMES
Stand by light is not going off and can not power on. Fortunately I did buy an in home waranty. Unfortunately I will be without the tv until they come fix it.
my tv was turned off and wouldn't come back on just blinking lights. this is a brand new tv my daughter bought for her father and when she bought it no one or nothing in the manuel stated that we would have this problem.we are a family that is just making it and SHOULD NOT have to pay for sony's mistake.Does anyone no sony's number so we can talk to someone directly. To let us know why this is such a common problem with this exspensive product. maybe the bbb should be made aware of this
Same problem - standby light blinks 7 times and you cannot turn it on again. However, it had a relapse one day and actually turned back on for a week, then went back on standby!
i have a sony trinitron model number kv32s42 and it will not turn on it stay in standby mode with the red light blinking. i am trying to figure out is there a special part i can order and where i can order it from so i can fix it myself and about how much do the part cost. i tried to unplug and plug it back up but it dont workÂ
I have the same problem. When I turn it on it would take it it 3 or 4 times to turn it on and each time the stand-by light would blink before it would stay on. Now it will not come on at all. The stand-by light blinks and that is all. I pulled the power board out but can not see anything that is obvious. Do you think if I replaced the whole circuit board that this would fix it
I too have a 40" Sony trinitron WEGA and it stays in stand-by /timer mode. It blinks 9 times. I am able to solder and confident working with the power supply. Please help
×