QUICKCAM COMMUNICATE DELUX

You can download the Logitech WEBcam drivers from their WEB site. Please click on this link and select your model WEBcam and the Windows XP or Vista version you require :- http://www.logitech.com/en-au/webcam_communications/webcams?wt.mc_id=usym_/quickcam_global&strf=Universal_Symlink

LogiTech Support can be taken from this site

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

What messsenger are you using? If you will let me know I can send you the fix so it will work. Thanks, Bud

if the image is ok into your computer ..the problem is not from you ...is just either the other computer ...or the network to blame ...but if is the same in yours ( blurry) try to ajust the optical device from the lens (the ring in the nose of the cam ) and the blur setting from the options /video capture filter ....

Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

Normal 0 How much memory is installed in your computer? The camera uses quite a bit of your memory to operate properly and would cause the poor video. Could be other
Issues, but worth checking.
Hope this helps. Bud

MOSTLY IT OCCUR DUE TO TECHNICAL FAULT. BUT MAKE SURE THAT U INSTALLED THE RIGHT CONFIGRATION OF THE WEB CAM AND COMPUTER.

U MUST CHECK THE MICROSOFT XP OR VISTA. DOWNLOAD PROPER AND TRY IT.... 

Run a Free Driver Scan to Update all your PC's Drivers here is where you can do that

I had a similar problem, the solution was as simple as not playing your voice through the speakers. The problem sounds like one of feedback. There are companies that sell phones that hook up to your usb port and will not cause this type of problem. Another solution may be lowering the volume on your mic.

there should be a full manual on the CD in pdf format which accompanied the Webcam.. the 4 page guide was most likely the Quick start guide