Question about XO Vision XOD1735 Car DVD Player

2 Answers

Installed reverse camera to Eonon E1025 unit. Power for the camera was taken from the reverse lights (positive and negative). Video wire from camera was taken back to the E1025 unit. I expected the orange wire (reverse) on the back of the unit was to let the UNIT know when the car was in reverse, thus displaying video from the camera. So I connected the orange wire to the "positive" power wire on the reverse light. The camera output displayed very well when the car was put into reverse, but when the car is taken out of reverse NOTHING ELSE on the unit will work. I tried just grounding the orange wire - the same result was obtained:- good video when in reverse, but nothing (no radio, no GPS etc.) when in any other gear. What have I done wrong?

Posted by goorwho on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 10 Answers

I had the same problem with my talon today, all you need to do is get another wire , connect one end to the 12v(red)backup tail light wire and connect the other end to ur dvd player and put it one the wire that is to be connected to the 12v for the revarse camera the wire should be orange but urs might be a different color.

Posted on Nov 30, 2010

  • Anonymous Nov 30, 2010

    i had the same problem with my talon today, all you need to do is get another wire , connect one end to the 12v(red)backup tail light wire and connect the other end to ur dvd player and put it one the wire that is to be connected to the 12v for the revarse camera the wire should be orange but urs might be a different color.

×

Ad

MITCHELL

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I hooked my camera and it isnt working . how can i get it to work , i have a eonon 5151u cd player. i hooked up the red wire to my reserve light on the black wire and i hook up my black wire to a blot on my truck for my gd, and back of the cd player i plug in the yellow video wire and the is a red wire where does that go ? i spice it to a red wire on my harness but it still dont work . do you have any picture or video to show me how to hook it up ? i have a mazda 3 sedan. thanks hope to here from you so as possible thanks .

Posted on May 17, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eonon problems


VW A3 Viewer Request Reverse Light Switch Location A3

You can use the BACK UP SWITCH AS A POWER SOURCE. Locate the back up switch on the tranny. Tap into the wire that becomes "hot" when the tranny is in reverse. Use a multi tester Positive lead in the switch socket, negative lead to ground. The wire you want is the one that has voltage in it when tranny is in reverse, ignition switch has to be on, but DO NOT start car. Use a tap connector and run wire to camera power. Make a ground from camera to any point on the frame of the console. Put a fuse in line in the positive power wire to the camera power input. When you put the car in revese, the camera will come on.

May 19, 2014 | Car Audio & Video

1 Answer

One reverse light mazda


"Life wire??" I don't know what you mean.
Usually, the backup camera will derive its power from the positive lead of your backup lights, so that it only turns on when you're backing up. You can use a standard wire tap to derive positive (+) from either backup light, and use chassis ground for the negative (-) lead of the camera.

Apr 09, 2014 | 2003 Mazda 323

3 Answers

I have a eonon e1025 how do i hook up my subwoofer with two rca cables and only one rom the headunit


i have this problem to i have used a y splitter but how do you turn on the sub port in the software interface ?

Feb 24, 2010 | Car Audio & Video

1 Answer

Can someone please tell me how to watch a dvd whilst driving on my eonon e1025


wire it up to the ground wire the cable thats says parking or sum thing like that this it the orange wire

Dec 28, 2009 | Car Audio & Video

1 Answer

Eonon 1025e screen mechanism broken. Need to replace two of the gears but cant find spares anywhere


Hi I have the same problem.E1025 unit has broken gears to make unit come out so just removed broken gears and manually pull out.Screen would fold up and down still until today .Now the other plastic gears have broken.I have tried to contact eonon to buy spares but dont wont to know about it.Now looking at old remote cars,video recorders etc to find something that will fit.No luck yet will let you know if i do. Eonon ****

Oct 02, 2009 | Car Audio & Video

2 Answers

Rear camera to show on screen in reverse? panasonic cq-vd7001u


It sounds like you may not have it wired correctly. When the vehicle is reverse the cam works, but when you shift to any other gear IE: park, drive etc you go to black screen as if no signal. I had basically the same problem on my unit, different unit but...on the back of my unit there was a wire, you probably have the same, that said rear cam 12v dc.I assumed this meant any positive wire would do, but this is NOT the case. That wire must be hooked to the 12v positive reverse light. With my cam I had the wires from the cam hooked up, red to positive reverse light wire, black to ground and obviously video wire to the video in on the unit. but the problem arose with that rear cam 12v dc wire on the back of the unit. It NEEDS to be connected to the same 12v dc wire as the cam itself. This acts as a 'switch' when in reverse, IE: the reverse lights come on sending power to the wires to turn on the cam. When you're not in reverse the camera 'switches off' because the lights are not on, thus no power is being sent to the wires, thus returning the unit to its normal operating screen. This worked for me, hope it helps. Good Luck.

Feb 18, 2009 | Panasonic CQ-VD7001U Car DVD Player

1 Answer

Eonon gps e0855


The brown wire, safety ground? needs to connected the ground (-ve), or the vechiles chassis, this a saftety circuit so it wont work unless this wire is wired to the negative of the battery.

Jun 03, 2008 | Car Audio & Video

Not finding what you are looking for?
XO Vision XOD1735 Car DVD Player Logo

3,092 views

Ask a Question

Usually answered in minutes!

Top XO Vision Car Audio & Video Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

37879 Answers

ray gallant

Level 3 Expert

72055 Answers

Relax
Relax

Level 3 Expert

33994 Answers

Are you a XO Vision Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...