Question about Dishwashers

Open Question

My dishwasher (Zug Adora 555) is flashing A9 and wont start washing. Any ideas? Does it need cleaning?

Posted by davesecomb on

Ad

3 Related Answers

localwonder

Michael Masters

  • 6784 Answers

SOURCE: clean light flashes and dishwasher wont start

HI, this is a dirty filter alert. it could also be a control fault as well. clean the filter and, disposal as well. if this alert cannot be cleared, replace the control board or, timer.

Posted on Jun 22, 2009

Ad
freetek

Steve Allison

  • 5569 Answers

SOURCE: Zug Adora 12s Dishwasher

Perhaps the solution to your problem can be found in the User Guide- 

Your model number appears with two suffixes; WW and BB thatmay only be color codes but user guides (which appear to be identical) areavailable for download from GE’s site:
 
http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-55031.PDF
 
 

Posted on Oct 02, 2008

Ad

Nicolo Carlo Parazo

  • 2187 Answers

SOURCE: problem with dishwasher

inspect the drain, there may be debris in the drain system. While at it see if you can clean the unit. Normally food that had remained on the dishes would accumulate and start clogging the unit over time.

Posted on Jun 08, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ge quiet power 3 dishwasher will not start, the normal wash and dry lights come on initially but then go off. Still will not work. Any ideas?


I have the same problem. If I turn the circuit breaker off (for 30 seconds) then turn it back on, the lights will light up, but the controls don't work. After several minutes, the lights go out again.

Jun 29, 2010 | General Electric Adora GHDA670N Built-in...

1 Answer

DIshwasher wont start, flashes pre-wash and was lights


1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher) 3) Pour powder indo the dishwasher 4) Turn the dishwasher controller to the top position (the 12 o?clock position) ? this is the eco-setting. 5) Press the on/power button on the dishwasher, so that it now turned on (a light will display) 6) Move the dishwasher controller to the ?R? position (it?s on the very left), and leave it there a second or two. 7) Move the dishwasher controller back to the eco-setting (the 12 o?clock position).

Apr 19, 2009 | Ariston Technologies L63SNA Stainless...

1 Answer

K-more elite dishwasher stuck in sensing mode; won't move to wash


Where did you find the sequence to clear the flashing clean light?

Apr 14, 2009 | Kenmore Dishwashers

2 Answers

Kenmore Dishwasher - Flashing Lights - wont start


Is the clean light blinking 7 times? If so this means you have a problem with your heating element

Dec 03, 2008 | Kenmore 15899 Built-in Dishwasher

2 Answers

Zug Adora 12s Dishwasher


Perhaps the solution to your problem can be found in the User Guide- 

Your model number appears with two suffixes; WW and BB thatmay only be color codes but user guides (which appear to be identical) areavailable for download from GE’s site:
 
http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-55031.PDF
 
 

Oct 02, 2008 | General Electric Adora GHDA670N Built-in...

1 Answer

GE Adora dishwasher not washing


The problem is insufficient water.
There are a few issues that cause this, and most are pretty easy to fix. Check this site for instructions and pictures:


Dishwasher Repair Tips Dishwasher Not Cleaning Dishes

Jan 31, 2018 | GE Dishwashers

1 Answer

Wont spin


I found the solution to clean the lint filter on the GE Adora. Go to http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf

I just did this and my washer is now running instead of the flashing start/pause and door unlocking. It was fairly easy. Make sure you have towels and a flat pan to catch the water if you don't have the machine on a riser. There may be water inside so a wet vac may be helpful too. Once my washer finishes what was in it, I have these funky towels to clean. You'll be very surprised what you find in the filter! Best of luck!

Sep 17, 2008 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18563 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...