I have a sony trinitron KV-36Fs12"tv. when power button is pushed the KLICK SOUND FOLLOWED BY THE red standby light flashes 5 TIMES, THERE IS NO PICTURE, CAN SOMEONE PLEASE TELL ME HOW TO RESOLVE THIS ISSUE?

According to the service manual (and reliable sources):

5 blinks = AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

(naturally the above circuit references/components may vary between models so get this assessed by a service technician)

Because it is a circuit issue, the cost of the repair depends on the replacement part(s)/board(s) used.

Get a quote before going ahead.

Sound ok but no picture screen is verticl ruler fil