Have a BOSCH 300/500 series washing machine. showing E27 error code. WHAT is it? Why don't they provide error codes?

1. Set the knob to off.
2. Hold down both the Spin Selector button and the Allergy Rinse button simultaneously.
3. While holding these two buttons down, rotate the knob one click to the left, to the "cold" position.
4. At that point, the display will show a diagnostic code and the unit will enter a self-test mode. In my case, the solenoid latch started clicking repeatedly. I pressed the Spin Selector button once or twice, which resulted in the display of new codes and then the release of the latch.
5. I set the knob back to off, and the washer now appears to be operating.
6. You're done.

Beko Washing Machine ' WMA Series ' Error Codes

www.ukwhitegoods.co.uk/.../fault-codes/...fault-codes/3623-beko-wma-...
Feb 6, 2013 - ... Fault Codes. Beko WMA Washing Machines With Display ... BekoWMA Series Washing Machine Fault Codes. These fault codes are ... E18 ...

UK Whitegoods • View topic - Beko WME7247W showing error code e18 ...

www.ukwhitegoods.co.uk/.../washing-machine.../beko-wme7247w-show...
Jun 19, 2011 - Hi, does anyone know what error code e18 is on a beko wme7247wwashing machine? thanks. User avatar louisebaxter: Whitegoods Newbie Beko wme7247w dc module burnt out
Apr 27, 2014
Bosch WAS24460GB showing error F:57
Sep 28, 2013
beko washer error code
Aug 18, 2012
Samsung B1415J showing error code EA ...
Jan 9, 2012
More results from www.ukwhitegoods.co.uk

turn the dial to the off position. Hold down both the delayed start and spin select buttons and turn dial to the left one click (cold position). you should then here the door unlatch. let go of the buttons. you will see some other codes p 01, p 02. turn dial to off. it should work fine after this. it worked for me. this should be in the manual.

HI THAT MEANS door is locked and will not start PLZ VISIT THIS LINK

http://laundry.manualsonline.com/support/bosch/washer/error-code-e27-3495138

E27 means there is a problem with the door lock. Unplug the machine for 5 minutes and try again. If the error code returns you will need to replace the door lock assembly.


If you have anymore questions please comment me back.

Thanks again Mark

I had this problem. I tried to interupt a cycle just after it started and then couldn't start the cycle again, with the E27 code coming up.

e27 refers to a problem with the door locking mechanism which could be due to a number of causes. The problem I had was with the solenoid in the door, not a genuine problem with the door latch mechanism.

Here is how I fixed it:

(1) Set knob to off

(2) Hold down spin selector and Allergy rinse buttons and turn the knob to the LEFT (right does not work)

(3) The display then shows a number of program codes P01 to P14. (Pressing spin selector rotates through the codes).

(4) Press spin selector until you reach P02 on the display, then press the start button, the door will click and the machine will begin a cycle.

(5) Turn the knob to OFF, and then you should be able to use the machine as normal.

Just fixed the E27 error code. Just turn dial to off and hold down delayed start button and spin selector button and turn dial to the left one click (cold). It should then click and open. open the door and turn back to off. Everything should go back to normal.

bosch washer error 27!

Put the washer on cold and run "TWO" cycles. There is too much soap or fabric softner.