I have set the pins on my Woods indoor timer 7 day mechanical model I made sure switch on side was set to timer and the timer does not move.. If I set it to on time it will stay on forever and dial never moves if I set it to an off position it stays off forever and dial never moves

Woods 50029 Indoor 7-Day Astronomical Timer ... - eBay

www.ebay.com > ... > See more Woods 50029 Indoor 7-day Astronomical Timer Pr...

Rating: 5 - ‎1 review
Or customize programming options turn lights on/off at sunset, sunrise or ... eBay item number: ...Woods 50029 Indoor 7-Day Astronomical Timer, Programmable, 2-Outlet Grounded ... The Woodsbrand of timers with sun tracking technology can automatically ... If you have immediate questions about application, installation,

Copy following link:
http://waterheatertimer.org/How-to-set-timers.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Each pin/segment represents 30 minutes.
To set timer for 2 hours, move 4 consecutive pins/segments up or down.
For 8 hours, move 16 consecutive pins/segments
http://waterheatertimer.org/images/Raise-segments-240.jpg
Dark background for numbers are usually 'night' or 6pm to 6am.
Timers usually have am and pm printed on timer dial.

Open following link for analog timer instructions:
http://waterheatertimer.org/How-to-set-timers.html
http://waterheatertimer.org/Woods-timers-and-manuals.html#59200

You posted under Woods vacation timer:
See large image

This is a 7-day timer.
Days are printed on the dial.
Each day has night time with dark background and daytime in light background

If you want to set time for Monday at 12 noon, rotate dial clockwise until Monday 12 (in light background) line up with arrowhead located on inner dial.
After that, move switch to TIMER

Timer turns lights ON-and-OFF at random times throughout week

You posted under Woods indoor plug-in 24-hour mechanical timer.
This particular timer:
Rotate dial until current time lines up with words: 'time now' located on inner dial
To set on-off times, look carefully at dial that rotates.
There are tiny pins that stick up on the dial.
Each pin represents 1/2 hour.
Use fingernail and click pin outward for each half hour you want timer ON
Leave pins inward for each half hour you want timer OFF
Next, plug table lamp into side of timer.
Last step, plug timer into wall outlet.

If this is not your timer, see all Woods timers and manuals:
Or add a comment and I will help.
http://waterheatertimer.org/Woods-timers-and-manuals.html

You can get the manual on the link below.

http://waterheatertimer.org/pdf/Woods-59200.pdf

Make sure the manual override switch on the unit is set to timer on.

http://waterheatertimer.org/Woods-timers-and-manuals.html

Manual for Woods 59337
http://waterheatertimer.org/pdf/Woods-59377.pdf

does it turn to the end??? if it doesnt its probly stuck but other than that it could b a delay or somthing like that

Go here for the manual. Starting at 4:30 PM push the pins outward until you reach 4:00 AM. Make sure all the other pins are pushed inward.