I have a craftsman 12 inch floor saw model# 113 29931 need a operators/owners manual i beleive this table saw was made in 1972

This is page 28 of the manualhttp://www.manualslib.com/manual/490926/Craftsman-113-235110.html?page=28#manual.

Craftsman 137 21825 Owner Manual
Although it is not the exact manual, it may be close enough to enable you to remove and replace the motor assembly.

https://www.manualslib.com/manual/32803/Craftsman-137-21825.html

Manage My Life which archives many Sears/Craftsman tool and appliance manuals has a manual for the 113.29991 but not the 113.29992. The two table saws may be similar that this manual will meet your needs. The direct link to the 113.29991 manual is http://www.managemylife.com/mmh/owner_manuals/3533/CRAFTSMAN-Saw-Table-L9090360?brand_name_search=113.29991 . I did find a manual for the 113.29992 available for sale on E-bay here: http://www.ebay.com/itm/CRAFTSMAN-OPERATING-INSTRUCTIONS-BENCH-SAW-10-113-29992-/310305601150 .

I hope this helps.

Cindy Wells

you can either go to searspartsdirect.com and with your model number order this key or if problems go to managemyhome.com and you can download a breakdown with the part number and also generally an owners manual that will help. If you get back to me with the model number I will try and find the part number for you.

https://c.searspartsdirect.com/mmh/lis_pdf/OWNM/L0810016.pdf

I have a paper manual for a 113.29970 12" direct drive, probably the same basic saw. I sell craftsman table saw parts on ebay as "hokienpokie" or you can contact me via email too, Jim

I found a copy by going to the Sears Parts Direct website, then select the link on the right that says "View Manual". It will take you to the Manage My Home website, where you will find a button for "View Manual".

I would upload to Fixya, but I cannot get the Manual upload link to work.

went to Sears site and no luck most parts are discontinued. So maybe try Grainger with the information from the data plate on the motor for a replacement or check in yellow pages for a local dealer of electric motors. I don't really think that there should be anything special as long as the output shaft and mounting are the same. Good luck sorry I don't have better info for you.

Here is a site to have the manual Emailed to you
http://www.sawmanuals.com/ Hope this works for you.....Please rate.......