Need instructions for wireless headphones - Televison & Video

Myron & Davis wireless headphones are likely designed to be used as Bluetooth headphones. They can sync or pair with Bluetooth-enabled devices such as smartphones, tablets, computers, or other compatible devices.
To use the headphones, follow these general steps:

1. Turn on the wireless headphones and put them in pairing mode. This may involve holding down a button or following specific instructions provided in the user manual.
2. On your Bluetooth-enabled device, enable Bluetooth in the settings and search for nearby devices.
3. When you see the Myron & Davis headphones appear in the list of available devices, select them to initiate the pairing process.
4. Once the pairing is successful, you should be able to use the wireless headphones to listen to audio from your connected device.

Keep in mind that the exact pairing process and features may vary depending on the specific model of Myron & Davis wireless headphones you have. If you have the user manual that came with the headphones, it's a good idea to refer to it for detailed instructions. Otherwise, you can try searching online for the manual or contact the manufacturer's customer support for assistance.

Presumably this is wireless headphones.?
If they're bluetooth, you need to make sure that the bluetooth is switched on in the tablet & the headphones
Use the bluetooth section in the tablet to search for the headphones
Follow th einstructions to connect

If it's wireless, then it's essentially the same idea, but you're using the wireless networks on the tablet to search for & connect to the headphones.?

Did the headphones not come with instructions.?

You go to your IPad Settings, make sure Bluetooth is on.
then turn on your headphones. You should see the headphones appear in Bluetooth list. ( see my example , I have a wireless keyboard that I have turned off but is paired).
Your headphones may have a button you need to push but not likely.

Could be the laptop needs a driver installing for it to work.

Conventional bluetooth and wireless needs a 2-way signal so the item you want to connect will appear in the laptop wireless and bluetooth menus and you can click on it and enter a password or pin number.
If the headphones don't appear in the menus you won;t be able to connect them. In that case you should refer to the headphone instruction manual.

Instructions
1
Set up the transmitter. Wireless headphones rely on a transmitter that sends audio via infrared or radio waves to your headset. Use the digital audio output (coaxial or optical), RCA outputs (red and white) or headphone jack on your TV to connect the transmitter. The connection will depend upon which outputs are available on your TV and/or the transmitter.
2
Use an RCA-to-headphone adapter. If you don't have a headphone jack on your TV and the transmitter includes only a headphone connection, connect an RCA-to-female headphone connector. This will allow you to plug the wireless transmitter into the female headphone end and then hook the RCA ends into your television's audio outputs. You may also need a 3.5 mm (mini jack)-to-1/4-inch adapter if the headphone plug on the transmitter doesn't match the television jack.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html
3
Set the transmitter on top of, or next to, the television. For infrared transmitters, you'll need a direct path between the headphones and the transmitter. Placing the transmitter on or near the TV will allow you to take advantage of the clear path you already have.
4
Plug in the transmitter and turn it on. Charge the headphones if necessary.
5
Turn on the headphones. Adjust the volume and settings and you're ready to watch TV.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html

good luck

Headphones are a convenient way to experience audio-rich entertainment on your own terms. Headphones allow you to customize your listening level without disturbing other people in your general vicinity. Headphone cables can be a hassle, however, so many new headphone models feature a wireless connection. PCs tend to be wire jungles, so eliminating one wire from a potentially jumbled mess can be an intriguing feature of wireless headphones. Connecting wireless headphones to your PC allows you to take advantage of the benefits of listening to your movies, music or games through headphones without the struggle of the headphone cable.

Charge up or place batteries in your headphones and transmitter. Wireless headphones require power to function. Many wireless headphones come with a charger base. You need to charge your headphones before you attempt to connect them to your PC. Some wireless headphone models require batteries, which you must install before you connect the headphones to the PC. Connect the transmitter to your PC. The transmitter may connect via the PC's headphone jack or USB port. If the transmitter connects to the headphone jack, plug it in and check your headphone's user guide to verify how to synchronize the headphones to the transmitter. If the transmitter connects via USB, you will likely need to install software to use your wireless headphones. If your wireless headphones are Bluetooth-compatible, continue to the next step. Pair your headphones via Bluetooth to your PC. If your PC is not Bluetooth-equipped, you will need to install a Bluetooth USB dongle. Turn on your headphones and open the Bluetooth software on your PC. Scan for Bluetooth devices from your PC. Your headphones should appear. Select the headphones and follow any further instructions to complete the pairing process. Test the headphones. Pick out a song or a video and play it on your PC. Connect your wireless headphones and verify that you can hear the audio. Find the volume controls on your headphones and adjust them to make sure the volume changes correctly. If your headphones are not functioning properly, verify that the headphones are turned on. If the headphones are on and you do not hear anything, verify that your transmitter is functioning properly and that you have your volume turned up on your PC. Recharge your headphones when you are finished using them. To ensure that the headphones are ready anytime you need them, you must always place them on the charging base when you are finished using them. If the headphones are battery-powered, be sure that you always have spare batteries on hand. Hope this helps.

add it as a new bluetooth device in the bluetooth menu!

Hello,
Sennheiser sent me the manual.
Thank you, Eletta