Do not know how to load envelopes in Kodak ESP printer.

I would guess that you have a setting that specifies the top tray to use. You should look at the printer settings menu and change it to the one you want.

Paper types you can use:

Plain paper - 20 to 24 lb / 75 to 90 gsm

Photo paper - 6.5 to 12 mils (up to 290 gsm)

Card stock - 110 lb / 200 gsm, max

Envelopes - 20 to 24 lb / 75 to 90 gsm

Transparencies - inkjet variety with white stripe

Labels - all commercially available inkjet varieties on 8.5 x 11-in. or A4 sheets

There is no setting to allow printing of thicker paper stock.

For more information on your printer, please see the ESP 7250 All-in-One Printer Knowledge Center:

http://wwwcaen.kodak.com/global/en/service/products/ekn036791.jhtml?pq-path=2300285

when you load the envelop, you should make sure that you adjusted the tray to lock the envelopes in place, or otherwise, they will move and cause a jam

Hmm that happens me too how is that possible..

http://www.kodak.com/global/en/service/publications/urg01062toc.jhtml?pq-path=9103/12666/15387

from here u can download manual..

it's easy man u can change ur printing area by go to ur printer in control pannel then check its properties then change ur paper type to "Letter" instead of "A4"

What do you mean they won't load. Are they not fitting in the tray, or are they not feeding through.

Have you tried this procedure?
----------------------------------------------------------
Loading Envelopes
You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer.
Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray.
2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.

3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes.
4 Leave the paper tray open while the envelopes are loaded.

If you have and it's not printing correctly, there is probably a problem with the document you're trying to print.

To load envelopes that are under 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps open and toward the front of the printer. To load envelopes that are over 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps closed and the short-edge of the envelopes facing into the printer. You can load envelopes up to the maximum fill line in the tray at one time. NOTE: Make sure set the envelope flaps are completely unfolded. NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and damage to the printer

Download and install Adobe Reader, if you do not have it.
Use the Get Adobe Reader button at this link

http://www.adobe.com


I am assuming you made a typo as many of us do and the title is correct and this is a Kodak 5300 All-In-One printer please respond if it is not and I will search for the correct printer.

Your printer's manuals and software can be found here

http://www.kodak.com/global/en/service/products/ekn033540.jhtml?pq-path=9104

As I do not know your operating system or version of MSWord, the following are hints about how this is done and may not be step-by-step accurate for you

http://safari.oreilly.com/0201741474/ch08lev1sec5

http://www2.essex.ac.uk/cs/documentation/use/word6/howto/env-lab.html