The outer screen of my tv is cracked and i was trying to find out where i could order a replacement

If JVC does not have it you are likely out of luck, if the outer protective screen it might be possible to have a piece of plexiglass cut and put in but the original was anti glare coated so you would likely have a glare issue.

it depends whats cracked

if the screen is cracked the no fix- screen cost as much as the tv.
if outer frame is cracked then replace frame.

There are 2 screens for this set, a protective (outer) screen and a fresnel (inner) screen. Which one needs to be replaced?

Dan

No it can't be repair only replaced.

Part# 4-090-943-01 $76.15
Freight charges may range from $45 - $150

it's hard not seeing the 'crack' but basically a real crack will allow the (plasma) gas to escape. if that happens just forget it and buy a new one if out of warranty.

if it really seems as tho there is a crack in the glass, I would just enjoy it while you can, and try not to ever move the TV as it may totally go at that point.

if under warranty get a tech out to the house before it expires. make them come out in this case rather than bring it in for the aforementioned reason.

go to acspsrts.com and order whatever u want

you cant, the screens for that model are no longer available and even a used scree assembly will be over 200. if you could find a new one they would be about 4 to 500.00

the outer screen on these units easly replaced. RCA #258797 their called supersheilds.. rca charges about 70 dollars for the item...If it is just that i have seen people just use a clear sheet of plexi. removeing the screens requires removein several torx 20 screw around the outer and remove the frame.. then the clear peice of plexi is attache with serval brackets.

I have a Magnavox 9P6040C101 that i am selling of the parts.
I have the plastic protective covering. Call me for dimensions.
443-255-1892

The outer screen is called a Lenticular screen, it may come as a set with the Fresnel (the inner, and the way I would actually go) the screen is very hard to replace usually on a DLP as they have a somewhat sealed upper side and alot of screws.