Question about Tylo SUPER SPORT-U8 Sauna Heater 8 kW
Remove the unit bottom panel (2 small screws) and look at the quick disconnect terminals on the heater rods ( 6 heating rods - 3 on each side of the unit). If you have any corrosion on these terminals, the wires will overheat and fail, preventing the heating rods from working. If the wires did overheat, you should see melted wire insulation. Replace bad wire and quick disconnect terminals with new. Should cost less than $20.
Posted on May 29, 2011
Jan 15, 2013 | Tylo Super Sport 7 Sauna Heater
Dec 19, 2012 | Sewing Machines
Jan 19, 2012 | Tylo COMBI-U7 Sauna Heater
Jan 26, 2010 | Tylo TS30-01 Control Panel
Jan 23, 2010 | Tylo SPORT-U2 Sauna Heater 2 kW
Jan 16, 2011 | Tylo SUPER SPORT-U8 Sauna Heater 8 kW
746 people viewed this question
Usually answered in minutes!
×