Kitchen Appliances - Others Logo

Related Topics:

Question about Bunn Margarita Machine Ultra 2 Slush Granita Maker

2 Answers

Freezing but pushing the lid off - Bunn Margarita Machine Ultra 2 Slush Granita Maker

Posted by sdurso74 on

Ad

2 Answers

jasbo

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bunn Master
  • 2,239 Answers

Too much mix. as it starts to freeze, the auger pushes the slush forward and upward. each bowl should only hold 2 to 2 1/2 gallons of mix.

Posted on Feb 13, 2011

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

Overfilling the unit.There is a max level product line.

Posted on Jan 30, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Vulcan deep freeze 300litres (chest type)

Parts should be sold at your nearest refrigerator parts supplier.
3helpful
1answer

I have a woods chest style deep freeze and the lid is very cold on the outside, but the sides are room temperature and the freezer works fine. Why is the lid cold and how can I fix it

Yes, the freezer temperature means the lid gets very cold. Every time you open it some moisture condenses in the lid and the outside ambient also affects it. The insulation may be beginning to break down and the ice is forming inside. It is not a major problem however and many freezers go on for years with freezing lids!
0helpful
1answer

I have water pouring from the side of the engine

Look for a crack in the block or head, a blown gasket, or a bad expansion plug*. I assume the water is your coolant. If that is the case, the level in the radiator will be low.
The coolant leak could be up higher - perhaps it's coming from the thermostat plumbing or the temperature sensor. It could even be a crack in one of the heater hoses. The worst case is the cracked block - in that case the engine is essentially junk. A leaky hose connection is the easiest to fix.
*Note on expansion plugs (AKA freeze plugs). These look like inverted jar lids pressed into the block and are designed to be pushed out if the coolant freezes so the expansion of the ice doesn't crack the block (freezing can happen if you don't have a proper anti-freeze/water mix in cold weather). If you don't replace your anti-freeze according to the maintenance schedule, they may rust out and cause a leak.
3helpful
2answers

I have a Kenmore (110-22642100) that will fill, agitate through wash cycle and that's it. It will not drain or spin.

check the lid switch,if it's bad this will happen,you can set the timer to spin and push it in,open the lid and push down on the lid switch with a screw driver,also when you push down on the lid switch and let it up you should hear a clicking sound,if you don't hear a clicking sound the switch is no good.part number 3949238 and it's around 35 dollars........http://www.youtube.com/watch?v=pbQU-NlkHcw......copy and paste
0helpful
1answer

The left side of the machine is freezing, but it's pushing all of the frozen product to the top of the lid and overflowing

each side should only have 2 to 2 1/2 gallons of mix. there is a line on the bowl that is the max fill line. as it starts to freeze, the auger pushes the product to the front and up. if it's too full, it'll over flow. just empty some out.
2helpful
2answers

WHIRLPOOL GOLD Model #GSW9545JQO, top load washing machine. After the wash cycle the machine in the "SPIN PAUSE" freezes and stops. By slamming the lid several times the cycle then continues to "OFF" If we...

It sounds like you need a lid switch. Click on this http://www.partselect.com/PartDetail.aspx?Inventory=350434&SourceCode=1 it will take you to the part ou will need, It only has two screws and it plugs in, so it's not problem to change.
Before ordering, take a look at this part http://www.partselect.com/PartDetail.aspx?Inventory=348557&SourceCode=1 this is the lid strike. It's what pushes the lid switch. Make sure it's not broken. It should look just like this one. Some times the tip will break off and willbe to short to push the lid switch down far enough.

Good luck.
Nov 24, 2009 • Dryers
0helpful
1answer

Washing machine not spinning

Does it click when closing the lid ? Sometimes , the lid switch arm , will work inserting something into it , but not with the lid closed . Try checking it using the lid itself . Occasionally , the arm wears to where it has to be pushed farther down to work so the actuator on the lid cannot push it far enough down . Have to replace the lid switch for it to work properly or bypass the lid switch from under the console .
0helpful
1answer

Frigidare washer will not go into spin mode

Does it click when closing the lid ? Sometimes , the lid switch arm , will work inserting something into it , but not with the lid closed . Try checking it using the lid itself . Occasionally , the arm wears to where it has to be pushed farther down to work so the actuator on the lid cannot push it far enough down . Have to replace the lid switch for it to work properly or bypass the lid switch from under the console .
0helpful
1answer

Won't spin

Does it click when closing the lid ? Sometimes , the lid switch arm , will work inserting something into it , but not with the lid closed . Try checking it using the lid itself . Occasionally , the arm wears to where it has to be pushed farther down to work so the actuator on the lid cannot push it far enough down . Have to replace the lid switch for it to work properly or bypass the lid switch from under the console .
Not finding what you are looking for?

Open Questions:

See all Bunn Margarita Machine Ultra 2 Slush Granita Maker Questions

585 views

Ask a Question

Usually answered in minutes!

Top Bunn Kitchen Appliances - Others Experts

Steve

Level 3 Expert

3290 Answers

David Shaub

Level 3 Expert

2994 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Are you a Bunn Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...